ZDP484NGPSS (Natural Gas)
ZDP484LGPSS (Liquid Propane)
GE Monogram® 48"
Dimensions and Installation Information (in inches)
Professional ranges offer a number of choices in size and cooktop configurations.
All Professional Ranges are factory set for natural or liquid propane gas. The correct model should be ordered for the installation situation.
Note: Conversion kits are included with the range if the wrong gas type was ordered. High Altitude kit, WB28K10553 for operation above 3,000 feet (for Natural and LP gas models), is also available. The kits must be installed by a qualified service technician at additional cost.
Installation Information
Before installing, consult installation instructions packed with product or online at Monogram.com for current dimensional data.
A 48" or 54" wide professional vent hood with a minimum 1200 CFM is recommended for installation over this range.
Advance Planning
Refer to dimensional drawings for appropriate placement and necessary clearances when planning the installation.
• Working areas adjacent to the range should have 18" minimum clearance between countertop and cabinet bottom.
• Clearance between range and side wall or combustible material must be at least 12" on each side.
• Installation must conform with local codes. In the absence of local codes, the range must comply with the National Fuel Gas Code, ANSI
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 7/08 | 130557 |
