How to delay the start of cleaning

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

1Select FEATURES.

2Select SELF CLEAN. Select upper or lower oven on double oven models.

3Select the desired self clean.

A 3-hour self-clean time is recommended when cleaning small, contained spills.

A self-clean time of 4 hours or longer is recommended for a dirtier oven.

LO (3 hrs) will self clean the oven for 3 hours. STD (4 hrs) will self clean the oven for 4 hours.

ADJUST TIME allows oven to be set for any time between 3 and 5 hours. Input the clean time (to nearest 5 minutes) using the number pads and select ENTER.

4Select DELAY CLEAN.

5Using the number pads, enter the time of day you want the clean cycle to start.

6Select ENTER.

7Select START.

The door locks automatically when you select START. The oven will remain locked. The display will show the start time. Once the self-clean cycle starts, it will not be possible to open the oven door until the temperature drops below the lock temperature and the goes off.

When goes off, you will be able to open the door.

NOTE: On double oven models, you can set a delay clean in both ovens. However, the second oven set will automatically delay the start of cleaning until the end of the first oven’s clean cycle.

After a clean cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel-wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

•You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

•If the racks become hard to slide, wipe the rack supports with cooking oil.

31