GE Monogram ZGG36N30YSS Combustible enclosures require insulated jackets, Clearances All Models

Monogram.™

ZGG36N30YSS–36” Outdoor Cooking Center

Dimensions and Specifications (in inches)

3" Min. for Lid Clearance

40-1/2" 23-3/4"

3" Min. for Lid	34-1/2"
Clearance

22-3/4"

10-1/8"

18-1/2"

18-1/4"

24-1/8"

35-1/2" Max.

3-1/8"

4x4 Opening for Gas Supply Line

Opening for Access Doors

18-1/2"

9-1/8"

18-1/4"

24-1/8"

35-1/2" Max.

4x4 Opening for Gas Supply Line

Opening for Access Doors

Installation in a combustible enclosure.

ZX36JYSS insulated jacket is required.

•Combustible enclosures require insulated jackets.

ZX36JYSS for 36” models and ZX48JYSS for 48” models. The insulated jacket must be supported from the bottom by a solid deck or ledge on each side beneath the jacket.

•Construct the enclosure as shown and place the insulated jacket into the enclosure. Place the cooking center into the jacket. No installation hardware is required.

Created 7/97

Installation in a non-combustible enclosure.

•In a non-combustible (masonry) enclosure, the grill drops into the opening and hangs from its side flanges. A deck is not required for support.

Clearances - All Models

•Allow 3” at the rear for lid clearance.

•Allow at least 12” clearance at the back of the grill when exhaust is directed to a window or a surface that is difficult to clean.

•Allow at least 6” clearance on each side to any non-combustible material located above the cooking surface for counterspace. Rotisserie models also require 6” clearance for placing and handling the motor and skewer.

•Allow at least 12” clearance on each side to combustible vertical materials.

For answers to your GE Monogram,™ GE Profile,™

GE, Hotpoint and RCA appliance questions, call

GE Answer Center® service, 800.626.2000.

UL	Listed by
	Underwriters

RLaboratories