GE Monogram ZGU122LPSS, ZGU122NPSS dimensions Outdoor Built-in Cooktop

ZGU122NPSS - Natural Gas Built-in Dual-Burner Cooktop ZGU122LPSS - LP Gas Built-in Dual-Burner Cooktop

Dimensions and Installation Information (in inches)

12" Min. to	10-1/2" to
Combustibles
on All Sides	the Bottom
	of the Side
	Support Flange	11"
		26-1/2"
		13"

7/8" Overlap at the back

*25" Countertop Depth

26-1/2" to Front of Control Panel

28" to Front of Bullnose

Outdoor Built-in Cooktop

These cooktops are designed to be installed into a non-combustible enclousure.

•The cooktop drops into the opening and hangs from the side flanges. It does not require support from the bottom.

•The cutout must be completely covered with non-combustible material such as stone, brick, ceramic tile, concrete board, etc. The countertop surface and edges must be flat and level.

•If the countertop has an overhang, it must be notched or cut back flush with the front face of the cabinet below. See notched detail below.

•Allow 12" minimum clearance on both sides and the back of the grill to adjacent vertical combustible construction.

•These gas cooktops cannot be used below any type of overhead construction.

•These cooktops are designed for outdoor use only. Do not locate the cooktop in a building, garage or other enclosed or semi-enclosed area.

•Locate the backside of the cooktop away from prevailing winds and avoid cooking in windy conditions.

11-7/8"

Gas and Electrical Locations

24-1/2"

Outdoor

Cooktop

ZGU122 10-7/8"

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Specification Created 10/08 170135