ZGU384LSMSS/ZGU384NSMSS
GE Monogram® 30" Stainless Steel Gas Cooktop
Dimensions and Installation Information (in inches)
|
| ||
| Deep at Center | ||
|
| ||
|
| ||
|
| 12” Min. | |
|
| from Cutout | |
| to Side Walls | ||
from Cutout | |||
|
| ||
to Rear Vertical |
|
| |
Combustibles |
|
| |
|
| ||
from Cutout |
|
| |
to Front of |
|
| |
Countertop |
|
| |
|
| 30” Min. | |
|
| Cabinet Base |
Note: The cooktop cutout is rectangular.
The bowed front edge of the cooktop will sit on top of the counter.
These cooktops may be installed in combination with a Monogram downdraft vent, a Monogram single oven or a Monogram warming drawer. See installation instructions for details.
Model ZGU384NSMSS - Natural Gas Model ZGU384LSMSS - Liquid Propane
These stainless steel cooktops are factory set for natural or liquid propane gas. Be sure to order the correct model for the installation situation.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Note: Reference Instructions, GE Monogram 30” Stainless Steel Cooktop Installation, packed with product, for complete details.
The house gas supply should be at least 1" from the back wall.
The electrical outlet should be 12" below the countertop and within reach of the 4 ft. power cord.
Listed by
Underwriters
Laboratories
Specification Revised 6/07 | 130241 |