GE Monogram ZHU30RSM dimensions GE Monogram 30 Electric Induction Cooktop, Min Junction Box

ZHU30RSM

GE Monogram® 30" Electric Induction Cooktop

Dimensions and Installation Information (in inches)

A

1-3/4"

Min.

D

2-1/2" Min. to Front Edge

B

2" Min. to Side Walls

C

16" Min

Junction

Box

Cutout Dimensions:

30" Models	A	B	C	D
ZHU30RSM	29-7/8"	21-1/2"	28-1/2"	19-5/8"

Electrical requirements

Product rating is 120/240V, 60Hz, 36" cooktops to a 50-amp circuit; and 30" cooktops to a 40- amp circuit. The cooktops must be connected to a supply circuit of the proper voltage and frequency and protected by a time-delay fuse or circuit breaker.

All models require 12" minimum clearance below the cooktop bottom to combustible materials.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

3-1/4"	6-1/4"
	5-1/2"

Combination installations

Consideration must be given to electrical supply locations when the cooktop is installed with other products in the same cabinet. Always refer to each product's installation instructions for clearances and electrical requirements.

•Install these cooktops with any exhaust hood of the same or treater width; 300 CFM or greater air flow rating is recommended.

•The 30" cooktop may be installed in combination with a Monogram® 30" downdraft vent. Install the 36" cooktop with a 36" downdraft vent. See downdraft vents for details.

•A Monogram single oven may be installed below these cooktops.

The serial plate is located on the bottom of the cooktops.

Listed by

Underwriters

Laboratories

Specification Created 6/07 130254