GE Monogram ZHU36RBM dimensions GE Monogram 36 Induction Cooktop

ZHU36RBM

GE Monogram® 36" Induction Cooktop

Dimensions and Installation Information (in inches)

A

B

		16" Min
	2" Min.
	to Side Walls	Junction
1-3/4"
		Box
Min.
D	C
	2-1/2"
	Min.
	to Front
	Edge

Dimensions:

		B	B
36" Models	A	(depth at sides)	(depth at center)	C	D
ZHU36RSM	36-1/8"	20-15/32"	20-7/8"	33-7/8"	19-1/8"	3-	1/4"

Electrical requirements

Product rating is 120/240V, 60Hz, 36" cooktops require a 50-amp circuit. The cooktops must be connected to a supply circuit of the proper voltage and frequency and protected by a time- delay fuse or circuit breaker.

All models require 12" minimum clearance below the cooktop bottom to combustible materials.

The cooktop bottom has air intake ports toward the front that help cool the components. Do not install a shelf or partition beneath the cooktop that is more than 18" deep.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

4-5/8" at

Note: When the cooktop is installed over an oven, the baffle at the front is not required.

Combination installations

Consideration must be given to electrical supply locations when the cooktop is installed with other products in the same cabinet. Always refer to each product's installation instructions for clearances and electrical requirements.

•Install these cooktops with any exhaust hood of the same or treater width; 300 CFM or greater air flow rating is recommended.

•This 36" cooktop may be installed in combination with a Monogram® 36" downdraft vent. See downdraft vents for details.

•A Monogram single oven may be installed below these cooktops.

The serial plate is located on the bottom of the cooktops.

Listed by Underwriters Laboratories

Specification Revised 11/07 130256