ZIF360NX
GE Monogram® 36" Built-In Custom All-Freezer
Dimensions and Installation Information
35"
Case Width
Case Depth
*84" From | |
Floor to | |
at | Top Frame |
Rear |
|
36" Frame to Frame Width
Depth Including Handles:
*Shipping height. The freezer can be adjusted to fit into a cutout
Product Clearances
These units are equipped with a
ZIF360NXRH, Freezer
Handle on the left side, the door swings left to right.
ZIF360NXLH, Freezer
Handle on the right side, the door swings right to left.
Caution
These units are
130ϒDoor Swing
25" Minimum to Wall
|
|
|
|
|
| 90ϒDoor Swing | |||
|
| Behind Frame | ||
|
|
|
|
|
|
|
|
|
|
4" Min. to Wall
The water and electrical supply must be located as shown. The finished cutout width must be
Note: The case trim overlaps cabinets at the top and sides. Frameless cabinets may require filler strips to prevent interference with cabinet door swing. The opening width must allow for filler strips.
Allow 25" minimum clearance for a full 130˚ door swing. Allow 15" for pan removal. for a 90˚ door swing, allow 4" minimum clearance for professional models. If the 90˚ doorstop position is used, pan access is maintained but pan removal is restricted.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 6/08 | 110153 |