GE Monogram ZIFS240PSS, ZIFI240PII dimensions Stainless steel

ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module (Custom panel required) )

ZIFS240PSS – GE Monogram Fresh-Food Refrigerator Module

(Stainless steel)	3/4” Overlay Panel Dimensions
	Model ZIFI240PII requires customer-provided		Overlay
Dimensions and Specifications (in inches)	overlay door panel.		Panel
	• The overlay panel must be secured to a 1/4"	Door
For a complete food storage center, install two Monogram refrigeration
	thick backer panel which slides into the trim.
modules side-by-side.
	A .10" thick spacer panel must be placed
Note: Reversible door swing on wine chillers/reserves and beverage	between the custom and backer panel.
centers only.	• A custom handle of your choice, supplied by	1/4"
Important Note: Products must operate from separate, properly	your cabinet maker, must be installed on the	Backer	.10 Inch
grounded receptacles.	overlay panel.	Panel	Spacer

Use a 3/4" router bit to cut a notch into the back side

Locate Outlets

of the assembled panel to allow for hinge clearance.

24"

3/4" Overlay Panel Dimensions (in inches)

10-1/

2"

10-1/2"

24" Min.

A (Width)

B (Height)

1/4" Backer

23-3/16"

29-9/16"

9"

9"

34-1/2" - 35"

0.10" Spacer

22-1/2"

29-1/16"

Max.

Max.

3/4" Overlay

23-5/8"

30"

1-

1/2"

1-

1/2"

B

NOTE: Max. assembled drawer panel weight

47-1/2" Min.

is 25 lbs.

Note: Additional cutout width may be required for models with

Overlay Panel

custom panels.

A

Spacer Panel

Grounding the Fresh-Food Refrigerator

important – (Please read carefully)

for personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall out.

do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

do not use an adapter plug to connect the refrigerator to a 2-prong outlet.

do not use an extension cord with this appliance.

Specification Revised 5/08

Backer Panel

Assemble overlay panels with glue and screws.

• Center spacer panel on the backer panel, left to right and top to bot- tom. Secure the panels with glue.

• Center the spacer/backer panel on the overlay panel. Secure with glue and screws. Countersink screws into the backer panel.

Listed by

Underwriters

Laboratories

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.

120032