Monogram.™
ZISW360DM - GE Monogram 36"
DISPENSER MODELS: |
|
|
|
|
RAISED OVERLAY PANEL DESIGN |
|
|
| Dispenser |
When a raised panel design is to be used, a |
|
|
| |
|
|
| Trim | |
custom wide middle rail is required to accept the |
| |||
dispenser trim. |
|
|
|
|
•The middle rail must be wide enough to allow for the dispenser trim to overlap the opening.
•The middle rail must be 1.100" total thickness to accept the dispenser trim.
DISPENSER TRIM FIT EXAMPLES: (NOT TO SCALE)
1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel
Wide
Middle
Rail is
Required
1/4" FRAMED PANEL
•The dispenser trim fits over the custom panel and snaps into the freezer door.
•The clips will not engage the door if the panel is more than 0.250" thick.
•If the panel is less than 0.250" thick, a noticeable gap may be created around the dispenser trim.
3/4" OVERLAY PANEL
•The dispenser trim fits over the custom panel and snaps into the freezer door.
•The clips will not engage the door if the panel is more than 1.100" thick.
•If the panel is less than 1.100" thick, a noticeable gap may be created around the dispenser trim.
1/4"
Framed
Panel
1/4" Backer Panel
.10" Spacer
Panel
3/4" Overlay
Panel
FREEZER DOOR
0.250" Thick
Ice / Water Dispenser
1/4" Dispenser Trim
FREEZER DOOR
1.100"
Total Thickness
Ice / Water Dispenser |
3/4" Overlay Dispenser Trim
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
Specification Revised 2/02
Listed by
Underwriters
R | Laboratories |
|
|
|
As an ENERGY STAR® Partner, | ||||
|
| GE has determined that this product | ||
|
| meets the ENERGY STAR® | ||
|
| guidelines for energy efficiency. |