For your safety
Metal grease filter
Care and Cleaning
Stainless Steel Hood
Before servicing or cleaning the unit, switch power off at the service panel and lock the service panel to prevent power from being switched on accidentally. If the service panel cannot be locked, fasten a tag or prominent warning label to the panel.
Clean the grease filter after 30 hours of “on” time. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A signal light will alert you when 30 hours has | NOTE: To remove filters |
|
|
| |||||||||||
passed. |
|
|
| ||||||||||||
push them back and |
|
|
| ||||||||||||
Remove the grease filters and wash them | down using the knob. |
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
either by hand or in the dishwasher using |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
To clean, swish the filters in hot soapy water or |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
wash them in the dishwasher. Do not use abrasive |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
cleansers. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For proper operation, be sure to use the lower set of filter holders.
Hood surfaces
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our
National Parts Center | 1.800.626.2002 |
ge.com
Light bulbs
To change the light bulbs:
1.Remove the trim ring by turning it counterclockwise.
2.Grasp the bulb on the edges and pull it straight out.
3.Replace with the same size bulb.
These 12 volt, 20 watt halogen bulbs are available at specialty lighting stores. Ask for GE bulb or equivalent:
6