ZV925SL
GE Monogram® 36" Glass Canopy Island Hood
Dimensions and Installation Information (in inches)
This vent hood may be vented to the outdoors or it can be installed for recirculating operation. All necessary parts for recirculating operation are supplied with the hood. No kits required. Must use an 8" round duct.
A decorative duct cover is provided to cover the duct from the top of the hood to a 7'11" to 9 ft. ceiling.
Accessories:
An optional stainless steel duct cover is available for 9'1" to 10'1" ceiling heights. Order ZX92510 optional duct cover at the same time as the vent hood and have on site before installation.
| *The supplied duct cover fits |
| 8 ft. to 9 ft. ceiling heights. |
| Order ZX92510 for 9'1" to |
*Height | 10'1" ft. ceiling heights. |
to |
|
Ceiling |
|
|
|
27 9/16" | 35 7/8" |
|
Dimensions and Clearances:
The vent hood should be installed 24" min. and 30" max. above the cooking surface, dependent on the ceiling height. The cooking surface should be at least 36" above the floor. Installation will be easier if the vent hood is installed before the range or cooktop/countertop is installed.
This hood can be installed over a Monogram electric or gas cooktop. It cannot be installed over a Monogram professional cooktop or range.
Installation Information: Before installing, consult installation instructions packed with product or available on monogram.com for current dimensional data.
Note: Installation height should be measured from the cooking surface to the outer glass sides.
24" Min.
30" Max.
36" Min.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
The exact installation height is determined by the ceiling height and duct cover trim strips provided with the hood. For optimum performance, the hood must be installed 24” min. and 30” max. above the cooking surface.
Listed by
Underwriters
Laboratories
Specification Revised 5/08 | 130668 |