INSTALLATION

Setting Up

Connect the curly cord and the handset.

Remove the screw of the battery compartment, using the screwdriver provided, and open the battery compartment.

Insert 4 good quality alkaline batteries (AAA size, 1.5V type, not supplied) into the battery compart- ment located on the base of the telephone.

Note : Do not use rechargeable batteries. Do not put batteries into the household rubbish, pay attention to battery regulations regarding battery disposal.

Replace the battery cover.

Desk Installation

Connect the 6ft line cord to the socket located at rear of telephone then connect the plug to the telephone wall socket.

Connect the power supply to the socket located on the back of the telephone then plug into the wall socket. Please choose a socket near your telephone socket to enable you to unplug the mains power quickly in case of a problem.

Lift the handset, if there is a dial tone, the telephone is ready for use. If there is no dial tone, check that everything is plugged in as described above.

Note: Mains power is required to power the multifunction features of the telephone. Fit 4 x AAA sized batteries in order to save and use stored numbers in case of power failure. Without mains or battery power, the telephone can still be used to answer calls or to manually dial out calls but all stored numbers will be lost.

Wall Mount Installation

1.Slide the handset hanger bar out and rotate it 180 degrees. Slide it back into place. The hook will now point up. This ensures the handset will not fall out of the cradle when it is mounted on the wall.

2.Plug the 8in short phone cord into the telephone jack on the Ampli500, run the phone cord underneath the wall plate adapter and through the opening.

3.Insert the Wall Plate adapter. Hold the wall plate adapter so that the raised mounting pins line up with the phone’s keyholes on the Ampli500. Once the holes are lined up, push the wall plate adapter in towards the Ampli500 and then slide the plate upwards until it is securely seated on the phone.

4.Once the Wall Plate adapter is installed, plug the 8 inch short cord into the jack on the wall.

5.Holding the phone slightly above the mounting screws on the wall jack, push the phone against the mounting screws so they are hooked into upper and lower key-hole slots on the back of the phone. Slowly slide the phone down until it snaps

into place.

screw

 

 

 

 

6. Connect the handset curly cord to the handset

 

 

 

 

 

 

and the other end to the telephone.

 

 

Wall mounting holes

7.Lift the handset, if there is a dial tone, the telephone is ready for use. If there is no dial tone, check that everything is plugged in as described above.

9

Page 8 Page 10
Page 9
Image 9
Geemarc 500 manual Setting Up, Desk Installation, Wall Mount Installation
Page 8 Page 10

500 specifications

The Geemarc 500 is a state-of-the-art communication device designed specifically to meet the needs of individuals with hearing impairments. This innovative phone combines usability with advanced technology, making it an ideal choice for those who experience difficulty in traditional phone conversations.

One of the standout features of the Geemarc 500 is its amplification capability. It offers up to 40 decibels of amplification, allowing users to enjoy clearer sound during phone calls. This significant increase in volume is essential for individuals who struggle to hear normal phone levels. In addition to amplification, the phone includes tone control, enabling users to adjust the frequency of sound to suit their personal hearing needs. This feature ensures that conversations are not only loud but also easy to understand.

The Geemarc 500 also incorporates visual support features to assist users with hearing loss. It is equipped with a bright visual ringer that flashes when a call is received, ensuring that users don’t miss important phone calls. This visual alert is particularly useful in situations where sound notifications might go unnoticed. Furthermore, the large, high-contrast buttons on the phone enhance accessibility, making it easier for users to dial numbers and navigate settings.

Another impressive characteristic of the Geemarc 500 is its compatibility with hearing aids. The phone supports inductive coupling, allowing users with T-coil enabled hearing aids to connect seamlessly and enjoy high-quality audio without background noise. This feature is extremely valuable as it enhances the quality of the call experience.

In terms of design, the Geemarc 500 boasts a user-friendly interface and an ergonomic build. The clear alphanumeric display ensures that users can easily see caller ID information and navigate through menus with minimal effort. The device can also store frequently dialed numbers, reducing the hassle of remembering or searching for contacts.

Overall, the Geemarc 500 is a thoughtfully designed device that effectively addresses the communication challenges faced by those with hearing impairments. Its combination of amplification, visual alerts, and compatibility with hearing aids makes it a reliable choice for an enhanced communication experience. Whether for personal use or for helping a loved one stay connected, the Geemarc 500 stands out as a robust solution in the realm of assistive technologies.
Top Page Image Contents