FUNCTIONS
MUTE FUNCTION
If you wish, you can speak privately to someone else in the room
without your caller overhearing. You will still be able to hear the caller
but the caller cannot hear you during the mute operation.
To switch on the mute mode during a call just press button
once. Your caller will not hear you anymore. Press key again to
resume the conversation with your caller.
13
RECALL FUNCTION
This function is related to CALL WAITING telephone service. If you
have this service, press R(time break Recall) button during a
conversation. This will institute a dialing tone for another call or,
otherwise, will allow you to get another call from CALL WAITING
service without disconnecting from your current conversation.
PAUSE FUNCTION
This function allows you to insert a pause in dialing sequence. E.g.
when you dial an international number, some telephone company
systems will not identify the entire number entry without a pause
between the prefix digits and the number itself. When you store, for
example, number 00-886-22-795-1234, you may have to dial 00,
then, then , then 886 and again, and then the
remaining digits. This allows adequate timing for the sequence of the
phone number to register with the telephone company system and
complete the dialing.
MESSAGE WAITING
If you have voicemail service provided by your telephone company, the
screen will display MESSAGE WAITING message when a message is left.
The icon MSG will also appear in the upper left corner of the screen. The
icon will remain until you access your voice mail and hear the message.
Note: This function should be supported by
your telephone company.