Geemarc Petite Trac manual FIT a 9 Volt PP3 Battery, Connecting Telephone

SETTING UP

FIT A 9 VOLT PP3 BATTERY

Why? Because if you have a power cut or disconnect your Petite Trac for any reason you won't have to re-set the clock.

-Remove the battery cover underneath the telephone.

-Fit the battery, ensuring that the correct polarity is observed.

-Replace the battery cover.

NOTE: Battery back-up is not designed to support the clock operation for lengthy periods in the absence of mains supply. It is recommended that the battery be changed every 6 months or earlier if necessary.

IMPORTANT: Dispose of batteries carefully. Never burn them or let children play with them.

CONNECTING TELEPHONE

-Connect the handset cord.

-Connect the PTT line cord to the telephone.

-Connect the PTT plug to the wall socket (classified TNV-3 according to EN60950 standard).

-Connect the AC adaptor plug into the socket at the rear of the base unit.

-Connect the AC adaptor to the wall socket (classified “hazardous voltage” according to EN60950 standard).