Connecting and Operating the 6x2 HDMI Switcher
How to Connect the 6x2 HDMI Switcher to your devices
1Connect the supplied cables from the HDTV sources into the 6x2 HDMI Switcher inputs.
2Connect the cable from your display (monitor or projector) into the HDMI outs of the 6x2 HDMI Switcher.
3Connect any Digital Audio Receiver into the Toslink out of the 6x2 HDMI Switcher
3Plug the 5VDC power supply into the 6x2 HD Switcher.
*Note: TOslink is only enabled if you are using an HDMI source and an HDMI display, otherwise the source goes into DVI mode by reading the DVI display EDID, and at the moment, the ABC buttons are not enabled on the remote.
How to Control the 6x2 HDMI Switcher
Use the
5
