CONNECTING AND OPERATING THE FIREWIRE 800 EXTENDER PLUS
How to Connect the Firewire 800 Extender Plus
1.Connect the supplied Firewire cable from the computer’s Firewire port into one of the firewire ports on the Firewire 800 Extender Plus Sending unit. The other port can be used for a local Firewire device.
2.Connect one pair of LC terminated fiber optic cables from the Firewire 800 Extender Plus Sender unit to the Optical Port 1 on the Firewire 800 Extender Plus Receiving unit.
NOTE: Additional Firewire 800 Extender Plus Receiving units can be chained to reach further distances. To do this, connect another pair of LC terminated fiber optic cables from the Optical Port 2 on the Firewire 800 Extender Plus Receiving unit to the Optical Port 1 on another Firewire 800 Extender Plus Receiving unit.
3.Connect your Firewire devices into the Firewire 800 Extender Plus Receiving unit at the remote location.
4.Plug the included 12 volt power supply into the Firewire 800 Extender Plus Receiving unit at the remote location.
5.Restart your computer only after you’ve made all the connections.
* Cable Requirement - 50 or 62.5 micron
8
