Gemini CDJ-505 CDJ-505

CDJ-505

FUNCTIONS: (CONTINUED)

12 BPM:Press and hold the BPM button to turn on the BPM read out, once

on you may TAPthe button to the beat of the music, after a few TAPS

the display will read out the average BEATS PER MINUTEof the track.

PGM:Allows you to create a set playlist. To program a set list into the

CDJ-505memory, begin by stopping the unit from play and pressing

PGMto begin the set list. Select a track by using the track selection but-

ton to scan to the first track to be placed in the set list.

When you have selected the proper track press PGMand the

CDJ-505will be ready to set your next selection. Repeat the previous

steps until you have completed your playlist, then press play to begin

the set list.

PITCH:Pushing and holding the PITCH button (the button will light up)

activates the PITCH CONTROL SLIDE. You can then select which PITCH

percent you want by pressing the PITCH button and choosing either +/-

8%, 12% and 24% depending on which LED is illuminated. Push and

hold the PITCHbutton again to deactivate this mode.

PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE

up or down will lower or raise the pitch percentage up to + or - 24%

depending on the PITCH BUTTONsetting.

PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically

bend the pitch up to +26% or bend the pitch down to -26% depending

on the setting of the PITCH BUTTON. Releasing the buttons will return

the pitch to the original pitch setting. You can use this function to match

the beat when mixing from one song to another.

LOOP SECTION: A LOOPrepeats the section between the entry point

(IN) and the exit point (OUT). To set a loop while the unit is playing,

start by pressing the IN BUTTON(it will light up) and when you reach

the desired end loop point press the OUT BUTTON(it will also light up).

The loop will continue playing until you press the OUT BUTTONagain

allowing the music to continue from that point on, to re-engage the loop

you must press the RELOOP BUTTON. When you have released your

loop the OUTBUTTON will turn OFF and the IN BUTTON will remain lit

to indicate that your loop is stored in the CDJ-505memory. Pressing the

INBUTTON again while the unit is playing will erase the previously

saved loop while saving your new loop entry point. Press OUTto exit

the loop and save a new complete loop.Press RELOOPto return to the

beginning of the previously saved loop from normal play. Press

RELOOPrepeatedly to cause the loop to stutter.

NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT,

WHILE ALL OTHERS WILL BE SEAMLESS.

PLAY/PAUSE: Each press of thePLAY/PAUSE BUTTON

causes the operation to change from PLAY to PAUSEor from PAUSE

back to PLAY. The PLAY/PAUSE BUTTONremains lit when in PLAY

mode, while it blinks in PAUSEmode.

CUE: While the unit is playing and after the cue point has been

programmed, pressing CUEwill cause the CD player to enter the

PAUSEmode (PLAY/PAUSE BUTTON blinks) at the programmed cue

point (the CUE LEDis lit). Holding down the CUE button

changes the function to preview , and allows you to stutter start or play

from the programmed CUE POINTReleasing the CUE button will return

the CDto the preset CUE point.

REPEAT: Press the repeat button once to engage (1) or repeat the

selected track. Press REPEATagain to engage ALL setting which will

repeat all the tracks on the CD.Press REPEAT again to disengage the

repeat function.

15

21 USB PORT TheUSB port allows the connection of any USB mass stor-

age device*.

USB/CD SELECT BUTTON TheUSB/CD select button allows you to

toggle from the CDJ-505internal CD drive and the mass storage de-

vice connected to the USBport.

TRACK SELECTION ROTARY: The TRACK SELECTIONROTARY

allows you to navigate through folders or search through tracks

depending on weather you are in USBmode or CD mode.

In CDmode the rotary can search through cd tracks, turning the

rotary to the right or clock-wise advances the selection, and turning

the rotary to the left or counterclock-wise decreases the selection.

Once you have found your selection you can load it for play by

pressing the ROTARYknob to confirm your selection.

In USBmode the ROTARY knob allows you to search through folders

and navigate through music libraries on your USB device, Simply ro-

tate the rotary until you find the desired folder and push the rotary

in to choose that folder, continue to search in this manner until you

find the desired track, then just like in CDmode press the rotary

again to load and play the desired track.

NOTE : ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PROGRAMMED CUE POINT.

YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING OF THE NEWLY

SELECTED TRACK.

We recommend that you use a MASS STORAGE DEVICEthat is no

larger than 2 gb and that only has less than 100 folders with less

than 1000 songs in any one folder. larger drives will work but they

will greatly affect the time in which it takes to search and or load a

song.

SPECIFICATIONS:

GENERAL:

Type.........................................Compact Disc Player & USB Mp3 Reader

Disc Type...................................Standard Compact discs (12 cm & 8 cm)

Time Display....................Track Elapsed, Track Remain, or Total remain

Variable Pitch.......................................± 24% Slider with Resume Switch

Pitch Bend............................................................................± 26% Maximum

Instant Start....................................................................Within 0.03 seconds

Installation..........................................................................................Table top

Dimensions:..................................................................11.0" x 3.5" x 11.75"

..............................................................(279.4 mm x 88.9 mm x 298.4 mm)

Weight Per Unit...............................................................5.78 lbs. (2.62 kg)

AUDIO SECTION:

Quantization......................................1 Bit Linear/Channel, 3 Beam Laser

Oversampling Rate..............................................................................8 Times

Sampling Frequency.........................................................................44.1 kHz

Frequency Response............................................................20 Hz to 20 kHz

Total Harmonic Distortion...................................................Less Than 0.05%

Signal to Noise Ratio..............................................................................85 dB

Dynamic Range.......................................................................................85 dB

Channel Separation.................................................................85 dB (1 KHz)

Output Level...................................................................2.0 +/- 0.2V R.M.S.

Power Supply......................................................AC 115/230V, 60/50 Hz

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITH-

OUT NOTICE FOR PURPOSE OF IMPROVEMENT.