INTRODUCTION:
Congratulations on your purchase of a
&manufactured by Gemini Sound Products. This state of the art speaker is backed up by a
CHAIN-LINK:
Only 1 additional speaker can be added to each speaker in a CHAIN- LINK setup. Connect your speakers first then follow the steps for a NORMAL setup, your AMPLIFIER should compensate for the extra speakers.
FEATURES:
All GSS Speakers Have the Following:
• Push Button Connectors • Metal Corners/Full Metal Grill • Large Carrying Handles
| |
• Passive 18" Subwoofer System | • 300 Watt RMS |
• Rubber Feet | • 35mm Stand Mount |
• SpeakonTM Input Jacks | • 8 Ohms Impedance |
| |
• 15" Woofer with High Temp Voice Coil | • 12" x 4" horn & two 3" tweeters |
• 160 Watt RMS | • 8 Ohms Impedance |
• 1/4 Input Jack |
|
CAUTIONS:
1.All operating instructions should be read before using this equipment.
2.To reduce the risk of electrical shock, do not open the unit. There are, NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified Gemini Sound Products service technician.
In the USA: If you experience problems with this unit, please call 1 (732)
3.Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4.This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.
5.When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.
6.DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7.DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.
CONNECTIONS:
PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS MATCHED POWER RATINGS!
Make sure your equipment is completely OFF and also lower ALL VOLUME, LEVEL, & GAIN controls and before connecting the speaker.
1.Use a 1/4" SPEAKER or SPEAKONTM CABLE (1) from your AMPLIFIER LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT JACK (3) or SPEAKONTM CABLE INPUT (3).
2.Another way to connect your AMPLIFIER to your speaker is the TERMINAL CUP (4). Use the
3.You can also use the additional 1/4” AUXILIARY or SPEAKONTM OUTPUT JACK (7) to
OPERATION:
The speakers can be used in pairs for a NORMAL setup, or in groups of four when
NORMAL SETUP:
1.Now turn on your MIXER or other signal source.
2.Then turn on your AMPLIFIER and increase the VOLUME or GAIN control as recommended by the AMPLIFIERS owner manual.
3.Start playing from your TURNTABLE, CD PLAYER, MIC, etc. and adjust the volume controls from your mixer to a reasonable level.
SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS,
PLEASE CALL: 1 (732)
SPECIFICATIONS:
| |
Amplifier’s Output Power: | 300 Wrms |
Frequency
Impedance | ...........................................................................................................................8 Ohms |
Components:….…………...............................................................…...…………….18" Subwoofer | |
Dimensions:……….……........................................W 21.5 x D11.25 x H25.4 (546x 740 x 646mm) | |
Features: | SpeakonTM Input Jacks, Carrying handles, Push button connectors, |
.................................................................... | Rubber feet, Metal Corners/Full metal grill |
Weight:……………………...........................……………..............................................77 lbs (35 kg)
| |
Amplifier’s Output Power: | 160 Wrms |
Frequency
Impedance:.........................................................................................................................8 Ohms
Components:….…………........................................15" Woofer 12" x 4" horn & two 3" tweeters
Dimensions:……….……...............................W 24.5” x D 20.25” x H 33.5” (622 x 515 x 851 mm)
Features:...................1/4” TRS Jacks, Push button connectors, Metal Corners/Full metal grill
Weight:……………………...........................……………….......................................63 lbs (28.6 kg)
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT
NOTICE FOR PURPOSE OF IMPROVEMENT.
(3)
