Gemini PMX-1100 manual Introduction, Features, Connections, Operation

INTRODUCTION:

Congratulations on purchasing the Gemini PMX-1100mixer. This state-of-the-art mixer is backed by a three year warranty, excluding crossfader and channel slides. Prior to use, we suggest that you carefully read all the instructions.

FEATURES:

•4 Stereo Channels

•State of the Art Cue Section

•3 Phono/Line Convertible, 4 Line, and 2 Mic Inputs

•Talkover

•Master and Record outputs

•Master Treble and Bass Controls

CAUTIONS:

1.All operating instructions should be read before using this equipment.

2.To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.

In the U.S.A., if you have any problems with this unit, call 1-732-969-9000 for customer service. Do not return equipment to your dealer.

3.Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.

4.This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.

5.When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.

6.DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7.DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.

CONNECTIONS:

1.Before plugging in the 15V AC Adapter (1), make sure that the POWER (2) switch is in the off position. The POWER LEDS (17) will be off.

2.The PMX-1100is supplied with 2 sets of output jacks. The MASTER OUTPUT (26) jacks are unbalanced and used to connect to your main amplifier. The REC OUTPUT (27) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix.

3.The MIC 1 (3) input (found on the front panel) accepts a XLR connector. The MIC 2 (4) input (found on the rear panel) accepts 1/4" connectors. All accept balanced and unbalanced microphones.

4.On the rear panel are 3 stereo PHONO/LINE (29, 32, 35) inputs and 4 stereo LINE (28, 31, 34, 37) inputs. The PHONO/LINE SWITCH (30) enables you to set the (29) input to Phono or Line. The PHONO/LINE SWITCH (33) enables you to set the (32) input to Phono or Line. The PHONO/LINE SWITCH (36) enables you to set the (35) input to Phono or Line. The phono inputs will accept only turntables with a magnetic cartridge. A GROUND SCREW (38) for you to ground your turntables is located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, a cassette player, etc.

5.Headphones can be plugged into the front panel mounted HEADPHONE(5) jack.

OPERATION:

1.POWER ON: Once you have made all the equipment connections to your mixer, press the POWER SWITCH (2). The power will turn on and the POWER LEDS (17) will glow.

2.CHANNEL 1: SWITCH # (8) allows you to select the PHONO 1/LINE 2 (35) or the LINE 1 (37) input. The CHANNEL SLIDE (9) controls the input level of this channel.

3.CHANNEL 2: SWITCH # (10) allows you to select the PHONO 2/LINE 4 (32) or the LINE 3 (34) input. The CHANNEL SLIDE (11) controls the input level of this channel.

4.CHANNEL 3: SWITCH # (12) allows you to select the PHONO 3/LINE 6 (29) or the LINE 5 (31) input. The CHANNEL SLIDE (13) controls the input level of this channel.

5.CHANNEL 4: SWITCH # (14) allows you to select the LINE 7 (28) or the MIC 2 (4) input. The CHANNEL SLIDE (15) controls the input level of this channel.

6.CROSSFADER SECTION: The CROSSFADER (26) allows the mixing of one source into another. The left side of the CROSSFADER (26) is CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER (26) in your unit is removable and if the need arises can be easily replaced. Your Gemini mixer comes with an RG-45 PRO (RAILGLIDE™) Dual-Rail Crossfader. RAIL GLIDE™ crossfaders have internal dual stainless steel rails that allow the slider to ride smoothly and accurately from end to end. Also available is our CF-45 PRO (PROGLIDE™) Dual-Rail Crossfader. This unique crossfader features, state of the art conductive plastic technology, for unlimited useage. Another crossfader we have available is the PSF- 45 (PRO SCRATCH™) crossfader with a special curve designed for scratch mixing. Just purchase one from your Gemini dealer and follow the instructions:

( 3 )