Gemini Industries 2920 lalmthout manual Safety, Inspection

Models: 2920 lalmthout

1 19
Download 19 pages 3.46 Kb
Page 16
Image 16

Manual GEMINI

Version: Sept. 2006

SAFETY

L To prevent injury and/or damage to your wheelchair, make sure that no objects and/or body parts are caught in the spokes of the driving wheels.

L Do not step on the footplates when getting into or out of the wheelchair. The footplates must be folded up or the entire foot supports must be swung aside beforehand.

L Always make sure the parking brakes are locked when getting in or out the Gemini.

L Investigate the effects of shifting the centre of gravity on the behaviour of the wheelchair for example on gradients, on ground sloping sideways, or when overcoming obstacles, only when a helper is present to secure and support you.

L The Gemini cannot be tipped too much backwards because the shift of the centre of gravity may cause the Gemini to flip backwards.

L Only use a Gemini which has been adjusted to the weight and length of the child.

L Use your wheelchair only according to regulations. Avoid, for example, driving at full speed against an obstacle (step or curb) without braking, or jumping down from a ledge or a landing.

L Check the profile depth and the inflation pressure of the tyres.

L When travelling outdoors, adapt your driving to weather and traffic conditions.

L To be better visible when driving in the dark, wear the brightest possible clothing or clothes with reflectors, and check that the reflectors mounted on the sides and rear of the wheelchair are clearly visible.

L Be careful with fire, especially burning cigarettes; the seat and back covers could ignite L Make sure that the maximum load is not exceeded.

INSPECTION

Like many other products, your Gemini needs to be checked periodically to ensure correct and safe usage.

BEFORE DRIVING OFF

L Check the tyres for visible damage and/or soiling. Clear the dirt, since it could impair the operation of the parking brake. When a tyre is damaged, kindly go to an authorised workshop for repairs (also refer to the chapter on "Tyre changing").

L Before driving off, check the effectiveness of the parking brakes. If they do not function properly, consult your specialist dealer (see also the chapter on "Parking brakes").

L Check the pressure of the tyres and inflate them if necessary (refer also to the chapters "Tyre changing" and "Technical details").

L Check the correct position of the safety belts en the function of the locks.

EVERY 6 MONTHS

Depending on the frequency of use, kindly check the following:

1. Cleanness

16

Page 16
Image 16
Gemini Industries 2920 lalmthout manual Safety, Inspection