Generac Power Systems 5418 manual Standard Engine & Safety Features

STANDARD ENGINE & SAFETY FEATURES

Home Standby – 18kW

High Temperature Automatic Shutdown	Vibration Isolation of Unit to Mounting Base
Low Oil Pressure Automatic Shutdown	12 Volt, Solenoid-Activated Starter Motor
Overspeed Automatic Shutdown (Solid-state)	Air Cleaner
Crank Limiter (Solid-state)	Fan Guard
Oil Drain Extension	Control Console
Rubber-Booted Engine Electrical Connections	Muffler Guard
Fuel Lockoff Solenoid	Flexible Fuel Lines
Secondary Fuel Regulator (N.G. and L.P.)	Critical Exhaust Silencer
Battery Charge Alternator	Battery Trickle Charger
Battery Cables	Main Line Circuit Breaker
Battery Tray	Weather Protective Enclosure (Locking Type)

HOME STANDBY CONTROL FEATURES

Home Standby Control Console

Manual/Auto/Off switch

Fault indicator lamps

Fuse (panel overload)

Set exercise time switch

Home Standby Microprocessor Controls

Automatic voltage regulation Utility voltage sensing Utility interrupt delay

(10-second setpoint) Engine warm-up

(10-second setpoint) Engine cool-down

(1-minute setpoint) Seven-day exerciser

Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.

18 kW UNIT WEIGHT: 451 lbs.

GENERAC® POWER SYSTEMS, INC. • P.O. BOX 8 • WAUKESHA, WI 53187

262/544-4811 • FAX 262/544-4851

Bulletin 0174200SBY / Printed in USA 04.07 © 2007 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice.