Generac Power Systems 5466 Specifications, Surface Mount Annunciator, Flush Mount Annunciator

21 Light Remote Annunciator

Specifications

Function	Color		Alarm	Latched
Pre-Low Oil Pressure	Yellow	n	Yes	Yes
Pre-High Water Temp	Yellow	n	Yes	Yes
Pre Low Water Temp	Yellow	n	Yes	Yes
Pre-Low Fuel	Yellow	n	Yes	Yes
Battery Charge AC Fail	Yellow	n	Yes	No
Low Battery Voltage	Yellow	n	Yes	No
High Battery Voltage	Yellow	n	No	No
Not in Auto	Red	n	Yes	No
RPM Sensor Loss	Red	n	Yes	Yes
Overcrank	Red	n	Yes	Yes
Overspeed	Red	n	Yes	Yes
Low Oil Pressure	Red	n	Yes	Yes
Hi Water Temp	Red	n	Yes	Yes
Low Water Level	Red	n	Yes	Yes
Emergency Stop	Red	n	Yes	No
Gen Running	Yellow	n	No	No
Gen Power (ATS)	Yellow	n	No	No
Line Power (ATS)	Green	n	No	No
Systems Ready	Green	n	Yes	No
Communications OK	Green	n	Yes	No
Spare	Green	n	No	No

Spare Keypad Switch - Can be used to implement a remote start function. (Model 5464 only)

Surface Mount Annunciator

The 21-Light Annunciator can mount to a flat surface with connections through the 0.812 Dia. knockout on the back surface or through 0.812 knockouts on sides as shown.

11.42

10.24

9.06		1.64
		5.8
		0.86
		0.812 Dia.
0.812 Dia.	4.53	Both sides
2.32
1.93	Flush Mount Annunciator

7.09

8.27

Four mounting holes for 21 Light Annunciator

4-mm -0.7 Female Thread

￿1.57

Thru

1.21

9.64

Outside

R0.59

Both Sides

Cut

Rough Opening

6.75 " x 9.88 "

6.49

1.42

0.87

This Flush Mount Box is recessed into the wall opening and the sur- face mount annunciator mounts to the (4) 4 mm screw holes on the back surface. After wire connec- tions are made the front annuncia- tor cover is attached.

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • guardiangenerators.com

©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177350SBY/Printed in U.S.A. 04.08, rev. 05.08