Assembly Instructions

Unpack your George Foreman Grill and check that all the parts are present. (See fig. 1)

1.Before first use wash the grill plate, drip tray and lid in warm soapy water. Wipe it off with a damp cloth and dry thoroughly.

DO NOT IMMERSE THE TEMPERATURE CONTROL PROBE IN WATER.

2.Place the Pedestal Stand on a flat, level surface.

3.Insert the slotted end of the Lower Pedestal Tube into the hole in the center of the Pedestal Stand and push down firmly.

4.Insert the tapered end of the Upper Pedestal Tube into the top of the Lower Pedestal Tube and screw the Tubes together.

5.Place the Grill Base on top of the Pedestal Tube assembly through the hole in the center of the Grill Base. Rotate slightly so that the tabs on the Pedestal Tube assembly align with the slots in the Grill Base and the Grill Base is level. Lift the Locking Latch up so it mates with the Locking Ring on the Bottom of the Grill Base and firmly lock into place.

6.Slide the Drip Tray into position using the guiding rails into the Grill Base.

7.Attach the Lid Knob to the Lid from inside the Lid.

8.Place the Lid over the Grill. Your Barbeque Grill is now ready for use.

Locking

Latch

Fig. 2

6