StatementFeaturesSpecifications
The NH series electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with a well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
Therefore, even if used for longer periods, the tricky
innovation in its design will prevent the electromagnet of
beingfalling when the screw are loosening up .
The EM-NH2350 Series are high quality and safety range of
standard fail-safe electromagnetic locks that is simply,works
well in order to effectively secure with doors.
and
issuitable for fire doors and emergency exit doors.
It is surface
mounted face to face locks offering up to 800 X 2 pounds
holding force which this lock is recommended for applications
which require higher levels of access and egress control

GIANNI INDUSTRIES, INC.

Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-NH2350 Ver.E Publishedon2008.08.18
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality,performance and commitment
tocustomer satisfaction.
&
Operating Features
EM-NH2350M:Bond sensor output & Status LED
Bond sensor is used to indicate the door status
as in a locked or unlocked condition.
is a visual feedback for user to give the true
status of the lock at any time. Green light
indicatesthe door is insecure (unlocked) and the
Redlight is indicates the door is secure (locked).
Status LED
Bondsensor monitor output : SPDT rated: 3A@12VDC
Fastenthe mounting plate on
the site then install
electromagnet lock with
power lead cable through
mountingplateslot hole.
Forassembling the mounting
plate and the electromagnet
lock into the groove, please
make the mark on the
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
sideisfeasible.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
the correct position is
encountered, use the Allen
Wrench to fasten the fixing
screwsthrough the bottom of
the electromagnet lock into
themountingplate.
After the electromagnet
firmly assembled with the
mounting plate, use the
screws to fasten the lock on
thesitepermanently.

Cable

Special Mounting Plate designEM-NH2350Double Midi Electromagnetic Lock

Offers up to 800 LBS X 2 Holding Force.

Anodized aluminum housing.

Groove template & housing for easy installation.

Dual voltage 12 or 24 VDC selectable

Anti-Residual magnetism designed.

Complete mounting hardware included.

)(.

VoltageTolerance: 15%
CurrentDraw: 500mA x 2@12Vdc;
250mAx 2@24Vdc )at 20 degree centigrade(
OperatingTemperature from -10 to 55 degree
centigrade
Humidity:0~95% non-condensing.
HoldingForce: Up to 800 lbsx2(363Kgx2)
Dimensions:
Magnet:(L)530, (W) 52, (D) 29 mm
ArmaturePlate:(L) 185, (W) 45, (D) 14 mm
MountingPlate:(L)530, (W) 29, (D) 6.5 mm
Finishesfor magnet and armature plate: Zinc
EpoxyPotting Compound: E87252 (S), UL94V-0
Weight(Approx.): 6.0 Kg
Patent:
ZL2006 2 0122522.X
Nr.20 2006 012 052.1
M308308
GB06 1 6099.8
0607229 (France)
No.13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-ChengCity, Taipei, Taiwan 23678
Tel:886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw