Application for the Electromagnet: EM-150
LZ-EM150 Bracket
Typical mounting on “IN-SWINGING” door
|
| |
Armature |
| Minimal:40mm |
| Frame | |
|
| |
|
| |
Door |
| |
|
|
200
40
40
30
6
180
6
180
48
Unit:mm
38
Installation Steps of LZ bracket for In-swinging doors
1 | 2 | 3 |
4
Find a mounting location on the door frame for the L bracket. Make sure that the door is still closeable.
Tighten the electromagnetic lock on the L bracket by using the fixing screw.
Assemble the Z bracket, and make sure that the Z bracket is adjustable.
Insert the guide pins into the armature plate.
5
6
7 | Finish |
| Power |
Put one rubber washer between armature plate and the Z bracket.
Close the door. Measure the correct position by bringing the armature plate close to the contact surface of the electromagnetic lock.
Turn on the power of
Once the position is correct, use the screws to permanently mount the Z bracket on the door frame. This should be the last step.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
Website: gianni.tw
GP001
The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.
Copyright © 2008 Gianni industries, inc. All rights reserved.