![](/images/new-backgrounds/1011083/110835x1.webp)
Specifications
Model GP6140-4000
Volume | 36.7 GPM | .................................. 139 L/min |
Discharge Pressure | 2175 PSI | 150 Bar |
Speed | 800 RPM | |
Inlet Pressure (max.) | 145 PSI | 10 Bar |
Plunger Diameter | 1.57” | 40mm |
Plunger Stroke | 1.89” | 48mm |
Crankshaft Diameter | 1.78” | 45mm |
Key Width | 0.47” | 12mm |
Crankshaft Mounting | Either side | |
Shaft Rotation | Top of pulley towards manifold | |
Temperature of Pumped Fluids (max). ... | 140 oF | 60 oC |
Inlet Ports | (2) | |
Discharge Ports | (2) 1" BSP | |
Weight | 309 lbs | 140 Kg |
Crankcase Oil Capacity | 1.1 Gal | 4.2 Liters |
Fluid End Material | Stainless Steel |
Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formula:
HP = (GPM X PSI) / 1400
GP6140-4000 HORSEPOWER
REQUIREMENTS
RPM | GPM | 500 PSI | 1000 PSI | 1500 PSI | 2175 PSI |
400 | 18.4 | 6.6 | 13.1 | 19.7 | 28.5 |
500 | 22.9 | 8.2 | 16.4 | 24.6 | 35.6 |
600 | 27.5 | 9.8 | 19.7 | 29.5 | 42.8 |
700 | 32.1 | 11.5 | 22.9 | 34.4 | 49.9 |
800 | 36.7 | 13.1 | 26.2 | 39.3 | 57.0 |
3