INSTALLATION INSTRUCTIONS

Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installa- tion. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance.

1.The pump should be installed flat on a base to a maximum of a 15 degree angle of inclination to ensure optimum lubrication.

2.The inlet to the pump should be sized for the flow rate of the pump with no unnecessary restrictions that can cause cavitation. Teflon tape should be used to seal all joints. If pumps are to be operated at temperatures in excess of 1600 F, it is important to insure a positive head to the pump to prevent cavitation.

3.The discharge plumbing from the pump should be properly sized to the flow rate to prevent line pressure loss to the work area. It is essential to provide a safety bypass valve between the pump and the work area to protect the pump from pressure spikes in the event of a blockage or the use of a shut-off gun.

4.Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of pressure spikes that occur in systems using a shut-off gun. A dampener must be positioned downstream from the unloader.

5.Crankshaft rotation on Giant Industries, Inc. pumps should be made in the direction desig- nated by the arrows on the pump crankcase. Reverse rotation may be safely achieved by following a few guidelines available upon request from Giant Industries, Inc. Required horsepower for system operation can be ob- tained from the chart on page 3.

6.Before beginning operation of your pumping system, remember: Check that the crankcase and seal areas have been properly lubricated per recommended schedules. Do not run the pump dry for extended periods of time. Cavitation will result in severe damage. Always remember to check that all plumbing valves are open and that pumped media can flow freely to the inlet of the pump.

Finally, remember that high pressure operation in a pump system has many advantages. But, if it is used carelessly and without regard to its potential hazard, it can cause serious injury.

IMPORTANT OPERATING CONDITIONS

Failure to comply with any of these conditions invalidates the warranty.

1.Prior to initial operation, add oil to the crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL.

Use Recommended Giant Oil

Crankcase oil should be changed after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.

2.Pump operation must not exceed rated

pressure, volume, or RPM. A pressure relief device must be installed in the discharge of the system.

3.Acids, alkalines, or abrasive fluids cannot be pumped unless approval in writing is obtained before operation from Giant Industries, Inc.

4.Run the pump dry approximately 10 seconds to drain the water before exposure to freezing temperatures.

NOTE: Contact Giant Industries for Service School Information. Phone: (419)-531-4600

Page 1 Page 3
Page 2
Image 2
Giant P420A-3100 operating instructions Installation Instructions, Important Operating Conditions
Page 1 Page 3

P420A-3100 specifications

The Giant P420A-3100 and P420A-5100 are two advanced compact excavators designed for versatility, efficiency, and performance in diverse job sites. Engineered by Giant, a company well-regarded for its innovative machinery, these models bring a wealth of features and technologies that cater to both small and large-scale projects.

The P420A-3100 is equipped with a powerful engine that delivers optimal performance while maintaining fuel efficiency. This model is designed for a broad range of applications, from landscaping to construction, making it an essential tool for contractors and operators. It offers a compact design that allows for easy maneuverability in tight spaces, paired with an impressive lifting capacity that enables users to handle heavy materials effortlessly.

In contrast, the P420A-5100 provides enhanced power and functionality. It features a larger engine with increased horsepower, contributing to superior digging performance. The P420A-5100 is particularly suited for more demanding tasks, such as heavy-duty excavation and demolition. Its robust construction ensures durability, enabling it to withstand rigorous use in challenging environments.

Both models incorporate advanced hydraulic systems that enhance operational efficiency and effectiveness. The hydraulic systems provide precise control over the excavator's movements, allowing for smoother operations and improved productivity. These excavators also come equipped with an ergonomic operator's cabin that prioritizes comfort and visibility, reducing fatigue during long working hours.

Another notable characteristic of both the P420A-3100 and P420A-5100 is their versatility in attachments. They can easily accommodate various attachments, such as buckets, augers, and grapples, further expanding their functionality. This adaptability makes them valuable assets for businesses that require multifunctional equipment.

Safety is also a key consideration in the design of these excavators. Both models are equipped with features such as safety guards and reinforced structures to protect the operator and the machine. The maintenance access points are thoughtfully designed to simplify inspections and servicing, contributing to reduced downtime.

In summary, the Giant P420A-3100 and P420A-5100 are powerful compact excavators that excel in performance, versatility, and safety. With their advanced technologies and thoughtful design, these models cater to the needs of various sectors, making them indispensable tools for operators and contractors alike. Transitioning between tasks is seamless, thanks to their ability to adapt to different attachments, solidifying their reputation in the excavator market.
Top Page Image Contents