Giant Triplex Ceramic Plunger Pump P46W, P46W-HK& P46HT PARTS LIST, Item Part, Description

P46W, P46W-HK & P46HT PARTS LIST

ITEM PART		DESCRIPTION	QTY.
1	07222	Crankcase	1
2	07181	Vent/Filler Plug with Seal	1
2A	07182	Gasket, Oil Filler Cap	1
3	08004	Cover, Crankcase	1
4	08005	O-Ring	1
5	08008	Oil Dipstick	1
6	01009	O-Ring	1
9	07188	Cylinder Screw with Slot	4
10	07223	Spring Washer
		(Excluding P46HT)	4
10	07223-0100 Spring Washer (P46HT only) 4
11	08012	Oil Drain Plug with Seal	1
11A	06709	Gasket, Oil Drain Plug	1
12	07224	Bearing Cover	2
14	08015	Radial Shaft Seal	2
15	08020	Ball Bearing	2
16	07225	Screw and Washer	6
17	07226	Shaft Protector	1
18	07227	Crankshaft	1
19	01024	Key	1
20	08024	Connecting Rod	3
22	07201	Crosshead Assy.	3
23	01031	Crosshead Pin	3
24A	07021	Plunger Pipe	3
24B	08456	Tension Screw	3
24C	07676	Copper Ring	3
25*	06648	Flinger	3
26	07206	Radial Shaft Seal	3
26A	11510	Spacer Sleeve	3
28	07207	Shim, Manifold Stud	2
29	07033	Manifold	1
30	07230	Pressure Ring	3
31	07241	V-Sleeve (P46W only)	3
31A	11511	V-Sleeve, High Temp.
		(P46W-HK, P46HT)	3

ITEM PART		DESCRIPTION	QTY.
32	07231	Support Ring	3
33	07232	Pressure Spring	3
34	07325	Retainer, Spring
		(P46W, & P46HT)	6
34	06018-0100	Retainer, Spring (P46HT)	6
35	06017-0100	Valve Spring	6
36	06016	Valve Plate	6
37	06014	Valve Seat	6
38	06015	O-Ring	6
39	07233	Suction Valve Adaptor	3
40	07234	O-Ring, Adapter	3
41	07235	Plug Manifold (Inlet)	3

4212004 O-Ring, Manifold Plug (Inlet)3

4307034 Plug & O-Ring

		(P46W & P46W-HK)	3
43	07792	Plug & O-Ring (P46HT)	3
44	07035	O-Ring for 43	3
45	07215	Stud, Manifold	2
46	08040	Hex Nut, Manifold Stud	2
47	08041	Spring Washer, Stud	2
48	07237	Housing, Rear V-Sleeve	1
49	07238	O-Ring, Rear
		V-Sleeve Housing	1
50	07239	Rear V-Sleeve (P46W only)	3
50	11512	High Temperature Seal
		(P46W-HK & P46HT)	6
51	07240	Support Ring, Rear V-Sleeve 3
52	07109	Plug, 1/2" BSP	1
52A	07110	Gasket	1
53	13338	Plug, 3/8" BSP	1
53A	08486	Copper Crush Washer
		(P46W & P46W-HK)	1

*This will not fit into older P46W pumps with brass retainers (#08064). It can only be used with part number 11510 (#26A). You can substitute p/n 13333 for 06648 only if the brass retainer (#08064) is used.

7