R-30-01-090526
6BA

USER'S MANUAL

1. System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by
double clicking the right or left button of your PS/2 Mouse.
2. System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current, you can
power on your system by entering password from the
Keyboard after setting the “Keyboard power on” jumper
(JP1) and password in CMOS Setup.
3. Support Modem Ring-On. (Include internal Modem and
external modem on COM A and COM B)
4. Wake-up on LAN supports(on J11): Your ATX power supply
must support larger than 720 mA 5V Stand-By current.
5. Support 3 steps ACPI LED.
6. Support LDCM
For Intel Pentium
II / III / Celeron Processor MAINBOARD
REV. 3.0 First Edition