Gigabyte 7VM400M-RZ user manual PnP/PCI Configurations

PME Event Wake Up

When set at Enabled, any PCI-PM event can awake the system from a PCI-PM controlled stated. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.

Disabled	Disable this function.
Enabled	Enable PME as wake up event. (Default value)

ModemRingOn/WakeOnLan

An incoming call via modem or an input signal comes from the other client server on the LAN can awake the system from any suspend state.

Disabled	Disable Modem Ring on function.
Enabled	Enable Modem Ring on function. (Default value)

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.

Disabled	Disable this function. (Default Value)
Enabled	Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :		Everyday, 1~31
Time (hh: mm: ss) Alarm :		(0~23) : (0~59) : (0~59)

KB Power ON Password

	Enter	Input password (from 1 to 5 characters) and press Enter to set the keyboard
		power on password.
PnP/PCI Configurations
		CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
			PnP/PCI Configurations
	PCI 1 IRQ Assignment		[Auto]				Item Help
	PCI 2 IRQ Assignment		[Auto]			Menu Level`
	PCI 3 IRQ Assignment		[Auto]
						Device(s) using this
						INT:
						Display Cntrlr
						-Bus 1 Dev 0 Func 0
	KLJI: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults
	PCI 1 IRQ Assignment
	Auto		Auto assign IRQ to PCI 1. (Default value)
3,4,5,7,9,10,11,12,14,15			Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
	PCI 2 IRQ Assignment
	Auto		Auto assign IRQ to PCI 2. (Default value)
3,4,5,7,9,10,11,12,14,15			Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
	PCI 3 IRQ Assignment
	Auto		Auto assign IRQ to PCI 3. (Default value)
3,4,5,7,9,10,11,12,14,15			Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
			- 27 -				BIOS Setup

English