Gigabyte GA-8I845GVM775 user manual Integrated Peripherals

English

2-3 Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Integrated Peripherals

On-Chip Primary PCI IDE	[Enabled]
On-Chip Secondary PCI IDE	[Enabled]
IDE1 Conductor Cable	[Auto]
IDE2 Conductor Cable	[Auto]
USB Controller	[Enabled]
USB Keyboard Support	[Disabled]
USB Mouse Support	[Disabled]
AC97 Audio	[Auto]
Onboard H/W LAN	[Enabled]
Onboard Serial Port 1	[3F8/IRQ4]
Onboard Serial Port 2	[2F8/IRQ3]
UART Mode Select	[Normal]
x UR2 Duplex Mode	[Half]
Onboard Parallel Port	[378/IRQ7]
Parallel Port Mode	[SPP]
x ECP Mode Use DMA	3

Ite m Help

Menu Level `

KLJI: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1:General Help
F5: Previous Values		F6: Fail-Safe Default		F7: Optimized Defaults

On-Chip Primary PCI IDE

Enabled	Enable onboard 1st channel IDE port. (Default value)
Disabled	Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled	Enable onboard 2nd channel IDE port. (Default value)
Disabled	Disable onboard 2nd channel IDE port.
IDE1 Conductor Cable
Auto	Will be automatically detected by BIOS. (Default Value)
ATA66/100	Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE
	device and cable is compatible with ATA66/100).
ATA33	Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device
	and cable is compatible with ATA33).
IDE2 Conductor Cable
Auto	Will be automatically detected by BIOS. (Default Value)
ATA66/100	Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE
	device and cable is compatible with ATA66/100).
ATA33	Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
	and cable is compatible with ATA33).
USB Controller
Enabled	Enable USB Controller. (Default value)
Disabled	Disable USB Controller.

GA-8I845GVM775 Motherboard - 32 -