Gigabyte GA-8IR2003 Boot Up Floppy Seek, Password Check, CPUHyper-Threading#, InitDisplay First

English

USB-CDROM	Select your boot device priority by USB-CDROM.
USB-HDD	Select your boot device priority by USB-HDD.
LAN	Select your boot device priority by LAN.
Disabled	Select your boot device priority by Disabled.

&Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Enabled	BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
	that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are
	all 80tracks.
Disabled	BIOS will not search for the type of floppy disk drive by track number. Note
	that there will not be any warning message if the drive installed is 360K.
	(Default value)

&Password Check

System	The system can not boot and can not access to Setup page will be denied
	if the correct password is not entered at the prompt.
Setup	The system will boot, but access to Setup will be denied if the correct
	password is not entered at the prompt. (Default value)

&CPUHyper-Threading#

Disabled	Disable CPU Hyper Threading.
Enabled	Enable CPU Hyper Threading Feature. Please note that this feature is only
	working for operating system with multi processors mode supported.
	(Default value)

&DRAMDataIntegrityMode

If you are using the Non-ECC DRAM, the mode will show "Non-ECC" and this function is disabled.

ECC	Set DRAM Data Integrity Mode by ECC.
Non-ECC	Set DRAM Data Integrity Mode by Non-ECC. (Default value)

&InitDisplay First

AGP	Set Init Display First to AGP. (Default value)
PCI	Set Init Display First to PCI.

GA-8IR2003 Motherboard - 34 -