English
Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Gillette Shaver.
Warning
Your shaver is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of electric shock.
Description
1Foil protection cap
2Shaver foil
3Cutter block
4Long hair trimmer (model 150 only)
5On switch («power»)
6«off» switch
7Power LED
8Shaver power socket
9Special cord set
Charging
The best environmental temperature for charging is between 5 °C and
35 °C. Do not expose the shaver to temperatures higher than 50°C for extended periods of time.
•Using the special cord set (9), connect the shaver to an electrical outlet with the motor switched off.
•To make sure that the shaver is switched off, press the «off» switch
(6) before you start charging.
•When charging for the first time, leave the shaver to charge continuously for 16 hours.
•The power LED (7) indicates that the shaver is connected to an electrical outlet.
•Subsequent charges will take about 8 hours.
•A full charge provides up to 20 minutes of cordless shaving time. This may vary according to your beard growth.
•Maximum battery capacity will only be reached after several charging/ discharging cycles.
Shaving
Press the on switch (5) to operate the shaver.
Model 150 only: To trim sideburns, moustache or beard, slide the long hair trimmer (4) upwards.
Tips for the perfect shave For best shaving results, we recommend you to follow 3 simple steps:
1.Always shave before washing your face.
2.At all times, hold the shaver at right angles (90°) to your skin.
3.Stretch your skin and shave against the direction of your beard growth.
Cleaning
The shaver head is suitable for cleaning under running tap water.
Warning: Detach the shaver from the power supply before cleaning the shaver head in water.
7
