Glen Dimplex Home Appliances Ltd 121R manual Connecting the cooker, Installing Your Cooker

Installing Your Cooker

Connecting the cooker	WARNING - THIS APPLIANCE MUST BE EARTHED
	The Baby Belling 121R is designed to operate from a 13A socket outlet.
	If the cooker is not already fitted with a plug proceed as follows:
	IMPORTANT:
	The cooker must be connected to the supply by a properly earthed 3-pin plug
	(minimum capacity 13 Amp). If a BS1363 fused plug is used it should be fitted
	with a 13 Amp fuse ASTA or BSI approved to BS1362.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow	Earth
Blue	Neutral
Brown	Live

As the colours of the wires in the mains lead of this appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows:

1.The wire which is coloured green and yellow must be connected to the

terminal in the plug which is marked with the letter E or by the earth symbol or coloured green, or green and yellow.

2.The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

3.The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

If you are not sure how to connect your cooker please consult a competent electrician.

Warning!	During use the appliance becomes hot. Care should be taken to avoid
	touching heating elements inside the oven.
	The cooker may already be fitted with a non-rewirable plug. If this is not of the
	correct type for the sockets in your home it must be cut off and the correct
	type fitted. If it is cut off it must be disposed of safely. There is a danger of
	electric shock if it is inserted into a socket.

To replace the fuse in a non-rewirable plug, simply prise out the fuse carrier, fit an appropriate replacement fuse, (13 Amp, ASTA or BSI approved to BS1

362)and replace the fuse carrier. Never use the plug without the fuse carrier fitted. If the fuse carrier is lost, a replacement can be obtained from your nearest Belling Spares Distributor, or most Electricity Company shops. The replacement fuse carrier will be identified by either colour coding to match the plug, or by markings on the fuse carrier and the plug. Make sure that a correct replacement is fitted.

This appliance has been approved by the British Electrotechnical Approvals

Board to the latest European safety standards.

3