WARNING. High voltage wires and/or transformers, concrete walls or narrow places may promote erratic behaviour or loss of control of the vehicle as a result of interference. Interference may also be encountered if another remote/radio controlled product or CB radio is operating on a similar frequency.
If control of the vehicle is lost due to interference, move to another location to operate the truck.
1.Turn the ON/OFF switch to the ON position.
2.To accelerate the truck (move forward), press the forward/reverse stick (1) forward. To reverse the truck (move backwards), move the forward/reverse stick backward.
Note. The further the forward/ reverse stick is pushed forward, the faster it will run.
3.To turn the truck right, move the left/right stick (2) to the right. To turn the truck left, move the RIGHT stick to the left.
Note. The wheels will remain turned until the stick is moved back to the middle position.
Centring wheel alignment
If the truck wheels fail to travel in a straight line when the left/right stick is released and centred, the wheel control must be adjusted to straighten up the wheels.
1.Turn the truck onto its roof.
2.Rotate the wheel centring lever
(11)slightly in one direction. If the truck turns more with the stick in the neutral position after the centring lever is adjusted, move the centring lever in the opposite direction.
Maintenance
Always ensure the battery terminals of the truck and remote control are clean. If there is
IMPORTANT. Use a clean cloth to clean the plastic parts of the truck and its components. Never use solvents as it will ruin the plastic parts and void warranty.
WARNING. Do not allow brake fluids, gasoline, petroleum- based products, etc. to come in contact with plastic parts as they may damage or destroy the plastic.
DO NOT deliberately abuse the equipment. Abusive practices can damage the equipment and become dangerous to the operator.
11
