3.Now that the blade slot in the blade barrel (10) is empty you can proceed to either turning over the existing planer blade or install a new planning blade by following the instructions.

Installing planer blades

1.The blades are reversible as they have a cutting edge on both sides. If a blade is worn or damaged, the blade can be removed and put the other way around. Either turn the existing planer blade (9) over or replace it if required.

2.Slide the good blade face up onto the blade support block of the blade barrel.

Note. If a blade is damaged, it can be replaced without the need to replace the other two blades. When blades are worn, they must be replaced as a set of three to prevent unbalanced operation with consequential dangerous vibration and possible damage to the tool.

Note. Ensure that the blades are positioned such so that they are flush with the rebate side of the base to enable correct rebating.

CAUTION. The blades must

1 3

2

not protrude out from the base

 

 

 

 

 

rebate side. This may cause an

 

 

 

 

 

 

 

 

 

 

injury and break the guard. There

 

 

 

 

 

has to be enough clearance so

 

 

 

 

 

that the blades do not touch the

 

 

 

 

 

drum guard in use.

 

 

 

 

 

Note: The ridge along the blade

should be on the blade face on the opposite side of the clamping screws.

3.Tighten the clamping screws, ensuring that they are tightened evenly in the following manner.

Tighten the two outside clamping screws snug tight, then the middle screw.

Working in the same order, fully tighten all three screws.

4.Loosen the vice and rotate the planer barrel and move onto the next planer blade, repeating the above blade removal and installation process for the remaining two blades.

5.Once the new blades have been installed remove blade barrel from vice and continue onto reinstalling the planer drum.

CAUTION. When installing blades, first clean out all chips or foreign matter adhering to the blade barrel (10) and the blades themselves. Use blades of the same dimensions and weight, or the barrel will oscillate and vibrate causing poor planing action and possibly a machine breakdown. Tighten the clamping screws (11) carefully when attaching the blades to the planer. A loose clamping screw could be extremely dangerous. Regularly check to see they are tightened securely.

It is essential that the blades sit square in the slot and that they are fully inserted prior to tightening the clamping screws. If the blades protrude or are not square, they could hit the casing with serious risk to the operator and others in the vicinity.

Correct setting

•Correct setting

(a)(b)

•Clean smooth cut.

•Nicks in surface – as caused by the edge of one or all blades not being parallel to the rear base line.

(a) (b)

9

Page 8 Page 10
Page 9
Image 9
Global Machinery Company 3BVSIPCF instruction manual Correct setting, Installing planer blades
Page 8 Page 10

3BVSIPCF specifications

Global Machinery Company 3BVSIPCF has established itself as a leading innovator in the field of industrial machinery. With a focus on advanced engineering and cutting-edge technology, the company has developed a diverse range of products designed to meet the needs of various industries, including construction, manufacturing, and logistics.

One of the standout features of 3BVSIPCF is its commitment to sustainability. The company has made significant strides in creating environmentally friendly machinery that reduces waste and promotes energy efficiency. Incorporating eco-friendly materials and designs, their machinery not only meets stringent environmental standards but also helps businesses reduce their carbon footprint.

In terms of technology, 3BVSIPCF utilizes state-of-the-art automation and robotics in its machinery. This integration allows for higher precision, increased productivity, and reduced labor costs. The company’s use of Artificial Intelligence (AI) and Machine Learning (ML) enables smarter operations, optimizing processes through predictive maintenance and real-time data analysis. This technological edge positions 3BVSIPCF as a pioneer in smart manufacturing.

Another key characteristic of Global Machinery Company is its adaptability. With an extensive research and development program, 3BVSIPCF continuously evolves its product line to cater to changing market demands. The company engages closely with clients to understand their specific requirements, allowing them to deliver customized machinery solutions that enhance efficiency and performance in diverse environments.

User-friendly interfaces are also a hallmark of 3BVSIPCF’s machinery. The outstanding design emphasizes ease of operation, enabling workers with varying skill levels to interact with complex systems effectively. Coupled with comprehensive training programs, this ensures that clients can maximize the benefits of their investment in machinery.

Finally, Global Machinery Company 3BVSIPCF stands out for its global reach and strong customer support network. With dedicated service teams across various regions, clients can expect prompt and knowledgeable assistance, ensuring the longevity and efficiency of their machinery operations.

In summary, Global Machinery Company 3BVSIPCF combines sustainability, advanced technology, adaptability, user-friendliness, and robust support to deliver exceptional industrial machinery to markets worldwide. This holistic approach solidifies its reputation as a trusted leader in the field, helping businesses thrive in an increasingly competitive landscape.
Top Page Image Contents