Note. The tool rests are right and left handed. Follow the diagrams to ensure the correct tool rest is fitted to the correct side.

Important. Prior to fitting the tool rests, ensure the grinder is turned off and the power plug is removed from the socket.

1.Remove the lower screw on the wheel guard (11).

2.Hold the tool rest (10) in the correct position against the inner surface of the wheel guard. Fit the screw through both sides of the guard and then through the tool rest.

3.Fit the star washer first, followed by the flat washer and then the plastic coated nut to the screw and tighten the nut sufficiently to support the tool rest but still allowing the tool rest to slide inwards and outwards.

4.Slide the tool rest to within a

maximum of 1.5mm from the wheel. Rotate the wheel one full revolution by hand to ensure the wheel does not contact the tool rest.

5.Tighten the thumb nut firmly to retain the assembly. Repeat the assembly operation for the second tool rest.

Bench mounting the grinder

The GMC Bench Grinders are supplied with 4 rubber mounts

(6) which assist in reducing the transmission of vibration.

It is strongly recommended that the grinder be firmly mounted to a bench or stand for safe operation.

The base of the grinder has a 12mm hole in each corner. These holes accept bolts up to 10mm in diameter. Mounting bolts are not supplied with the unit.

Where the grinder is to be mounted to a steel work bench, it is advisable to place a piece of timber between the bench and grinder then bolt through the grinder and timber into the bench. This further assists to reduce vibration.

Important. When directly mounting the grinder ensure:

•The surface under the grinder is flat and clean.

•The 4 mount bolts are applied evenly and not over tightened.

Note. The four rubber mounts should remain in place if mounting bolts are used.

Using the On/Off switch

1.To turn the grinder on, press the right hand side of the On/Off switch (8) to the position marked "ON"

2.To turn the grinder off, press the left hand side of the On/Off switch (8) to the position marked "OFF".

Using the work light

1.The work light (13) can be used to illuminate the work area and provide greater visibility.

2.To turn the work light on press the light On/Off switch

(9)to the position marked " ON".

3.To turn the work light off press the light On/Off switch

(9)to the position marked " OFF".

9

Page 8 Page 10
Page 9
Image 9
Global Machinery Company BG834HPL, BG612HPL Bench mounting the grinder, Using the On/Off switch, Using the work light
Page 8 Page 10

BG612HPL, BG834HPL specifications

Global Machinery Company has made a significant impact in the machinery industry with its innovative BG834HPL and BG612HPL models. These machines are designed to cater to various needs in construction, agriculture, and industrial applications, providing robustness, efficiency, and ease of use.

The BG834HPL is a high-performance excavator that stands out for its power and flexibility. It is equipped with a powerful engine that delivers optimal performance under different working conditions. One of the main features of the BG834HPL is its advanced hydraulic system, which allows for precise control and efficient operation. This system not only reduces fuel consumption but also enhances the overall effectiveness of the machine.

Additionally, the BG834HPL boasts a spacious and ergonomic cab that ensures operator comfort. With intuitive controls and excellent visibility, operators can work longer hours without fatigue. The machine is also designed with a high level of safety in mind, featuring reinforced structures and safety mechanisms that protect the operator and those working around it.

On the other hand, the BG612HPL is a compact yet powerful earth-moving machine that excels in tight spaces and urban environments. Despite its smaller size, the BG612HPL does not compromise on performance. It is powered by a state-of-the-art engine that meets stringent emission standards, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The BG612HPL features advanced traction technology, ensuring optimal stability and control on various terrains. Additionally, its quick coupling system allows for easy attachment changes, maximizing versatility and productivity. The machine's compact design is complemented by a robust build, ensuring longevity and low maintenance costs.

Both models utilize cutting-edge technology, including telematics systems for real-time tracking and monitoring of machine performance. This feature provides users with valuable insights, allowing them to optimize operations and minimize downtime.

In conclusion, the BG834HPL and BG612HPL from Global Machinery Company are exemplary models that embody innovation and efficiency. With their powerful performance, advanced technologies, and user-centric designs, they are ideal choices for professionals seeking reliable machinery to tackle demanding tasks. As the industry continues to evolve, these models represent a commitment to quality and excellence in engineering, ensuring that Global Machinery Company remains at the forefront of the machinery market.
Top Page Image Contents