Forward/reverse switch

To stop the drill, release the trigger switch.

Note. You can only change the direction of rotation of the drill using the forward/reverse switch when the trigger is NOT depressed.

This switch (4) will allow you to change the direction of

the motor while the trigger switch is not depressed.

Drilling uses the forward mode. The reverse mode is intended for the removal of screws.

Adjustable torque

This drill is equipped with 20 torque settings plus one drill setting which are controlled by the torque collar (2). By rotating the collar behind the chuck, it is possible to adjust the torque.

This will allow better control when using the drill as a screwdriver as it prevents over- tightening of the screws.

For drilling, always use the use the Drill position by aligning the Drill symbol with the triangular indicator on the front face of the drill near the torque collar.

For setting the torque position, select a low setting on the torque collar and align the selected symbol with the triangular indicator on the top of the drill. Increase gradually to set the correct torque. It is better to use a scrap piece of material if possible to set the torque.

Inserting and removing bits

This drill has a keyless chuck, which means that a chuck key is not needed to secure a bit in the drill.

1.Open the chuck by holding the rear section of the chuck firm and rotating the front section in a anti-clockwise direction, sufficiently enough to allow the drill bit required to fully enter the jaws of the chuck.

2.Ensure the drill bit is fully inserted, so that the chuck

jaws grip the straight section of the bit.

3.Holding the rear section of the chuck firmly, rotate the front section of the chuck clock-wise until the jaws tighten on the drill bit. The front section of the chuck needs to be tightened firmly to ensure the drill bit is held securely.

4.To remove the drill bit, hold the rear section of the chuck firmly and rotate sharply the front section of the chuck in a anti-clockwise direction, sufficiently enough to allow the drill bit to be removed.

Adjustable side handle

1.Turn the side handle clamp knob (6) anti-clockwise

to loosen the collar fully and slip it over the chuck (1) onto the drill.

2.Adjust the position of the side handle (5) to suit the application and tighten the side handle clamp knob (6) to secure it in place.

BN18SB specifications

Global Machinery Company BN18SB is a leading name in the heavy machinery sector, recognized for its commitment to innovation, efficiency, and performance. This robust machine is primarily designed for construction, mining, and industrial applications, reflecting Global Machinery's dedication to meeting the diverse needs of its clientele.

One of the standout features of the BN18SB is its exceptional power-to-weight ratio, which allows it to deliver outstanding performance while maintaining a manageable weight for ease of transport and operation. The machine is equipped with a high-performance engine that not only provides substantial horsepower but also emphasizes fuel efficiency. This aspect is crucial for contractors looking to manage operational costs without compromising on productivity.

The BN18SB incorporates advanced hydraulic systems, enhancing its lifting and digging capabilities. This technology ensures precise control, allowing operators to execute tasks with greater accuracy and speed. The hydraulic system is designed for robustness, minimizing downtime and maintenance requirements, which is a decisive factor for businesses aiming to maximize their operational uptime.

In addition to its power and efficiency, the Global Machinery BN18SB is built with operator comfort in mind. The spacious cabin is ergonomically designed, featuring intuitive controls that allow for seamless operation. Enhanced visibility from the cabin and sufficient noise reduction are also key characteristics, reducing operator fatigue during long work hours.

Safety is paramount in the design of the BN18SB. It is equipped with state-of-the-art safety features including an automatic shutdown system, rollover protection, and advanced stability management. These features not only protect the operator but also ensure compliance with international safety standards.

The machine's versatility is another significant advantage. It can be equipped with a variety of attachments, allowing it to perform multiple functions such as excavation, grading, and material handling. This adaptability makes it a valuable asset in any fleet, enhancing its utility across various types of projects.

In conclusion, the Global Machinery Company BN18SB stands out as a powerhouse in the heavy machinery industry, combining performance, efficiency, and safety. With its advanced technology, ergonomic design, and versatile capabilities, the BN18SB is an ideal choice for contractors and businesses seeking reliable and high-performing machinery for their projects. This machine not only represents the pinnacle of engineering excellence but also encapsulates Global Machinery's commitment to providing solutions that drive productivity and success in diverse industrial applications.

Global Machinery Company BN18SB Forward/reverse switch, Adjustable torque, Adjustable side handle

Models: BN18SB