Global Machinery Company BS900M manual

•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for sanders

WARNINGS. Before connecting a tool to a power source (mains switch power point receptacle, outlet, etc.) be sure that the voltage supply is the same as that specified on the nameplate of the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.

Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the sanding belt.

•Fully unwind cable drum extensions to avoid potential overheating.

•When an extension cable is required, you must ensure that it has the right ampere rating for your power tool and is in safe electrical condition.

•After long working periods external metal parts and accessories could be hot.

•If possible, always use clamps or a vice to hold your work.

•Always switch off before you put the sander down.

•Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor.

•When sanding wood, always connect the dust bag or use a dust extraction system.

•Before using the sander with metal, always remove the dust bag from the outlet as sparks may ignite the dust or the bag.

•Do not continue to use worn, torn or heavily clogged sanding belts.

•Do not touch the moving sanding belt.

•Ensure that you have removed foreign objects such as nails and screws from the work before commencing sanding.

•Rags, cloths, cord, string and the like should never be left around the work area.

•Use safety equipment including safety goggles

or shield, ear protection, dust mask and protective clothing including safety gloves.

Wear goggles

Wear earmuffs

Wear a breathing mask

BS900M specifications

The Global Machinery Company BS900M is a cutting-edge piece of equipment that has garnered attention in various industrial sectors due to its robust performance and innovative technologies. As a leader in heavy machinery, Global Machinery Company has designed the BS900M to meet the demands of modern construction and manufacturing environments.

One of the standout features of the BS900M is its powerful engine, which allows for exceptional performance and efficiency. The machine is equipped with a high-output diesel engine that delivers unmatched torque and power, enabling it to tackle even the most challenging tasks. Whether it’s lifting heavy loads or performing intricate movements, the BS900M rises to the occasion with ease.

Another key characteristic of the BS900M is its advanced hydraulic system. This system provides precise control over the machine's operations, allowing for smooth and efficient function. The machine's hydraulic components are designed to minimize energy loss and increase performance, making it ideal for applications that require finesse and accuracy.

The BS900M features a state-of-the-art control interface, which enhances user experience and operational efficiency. The intuitive design of the controls enables operators to navigate functionalities with ease, while the digital display provides real-time data on performance metrics. This feature is particularly beneficial for monitoring fuel consumption and operational status, allowing for proactive maintenance and cost management.

In terms of safety, the BS900M is equipped with multiple features designed to protect both the operator and the machine. Safety sensors, emergency stop buttons, and ergonomic design elements contribute to a safe operating environment. These features ensure that even in high-pressure situations, operators can maintain control and confidence.

Durability is another hallmark of the BS900M. Constructed with high-quality materials and components, the machine is built to withstand the rigors of heavy use. Its robust frame and weather-resistant design make it suitable for various environments, from urban construction sites to remote mining locations.

In summary, the Global Machinery Company BS900M combines power, precision, and safety, offering a reliable solution for industries that demand high performance. With its advanced technologies and user-friendly interface, this machinery stands out as a versatile asset for any operation. Its impressive capabilities, durability, and safety features make the BS900M a top choice for professionals in the field.

Global Machinery Company BS900M instruction manual Additional safety rules for sanders

Models: BS900M