![Assembly](/images/new-backgrounds/89898/8989817x1.webp)
Assembly
Caution. Never carry out any assembly operations or adjustments with the power connected to the mower. Always ensure that the power button is in the off position and that the power plug is disconnected from the supply.
1.Fit the two ends of the lower handle (8) into the slots in the mower body (7) and fix them in position with the two lower handle fixing clips (9).
Note. Make sure that the switchbox is facing upwards and that the power cable (22) is not wrapped around the handle. It must trail freely behind the switchbox on the upper handle.
Adjusting the cutting height
Caution. Never carry out any assembly operations or adjustments with the power connected to the mower. Always ensure that the power button is in the off position and that the power plug is disconnected from the supply.
1 | 1 |
2. Fit the upper handle (1) to | 2 |
the lower handle (8) and |
secure them together with the coach bolts, washers and wing knobs (5). Ensure that the bolt is inserted from the inside of the handle so that the wing knob (5) attaches on the outside.
3.Using the two cable clips (15), secure the black- coloured motor cable (14) to the lower handle (8) and upper handle (1).
1.Choose a level area with a firm surface and remove the grass box (10).
2.Access the blade spanner (12) and blade height spacers (21).
3.Turn the mower on its side.
4.Put on a pair of sturdy gloves to protect your hands.
5.Block the rotation of the blade (19) and use the blade spanner (12) to unscrew the blade bolt (20) in an
1
5
33
66
6.Remove the blade bolt (20), blade (19) and blade height spacer (21).
9