Introduction
Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.
You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire Instruction Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
WARNINGS.
1.Do not attempt to change the position of the laser under any circumstances, it has been set at the factory and is accurately focused on the centre of the saw blade.
2.It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces.
Description of symbols
The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
Wear hearing protection.
Wear eye protection. Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards for electromagnetic compatibility.
Specifications
Voltage: | |
|
|
Power rating: | 1200W |
No load speed: | 5000 |
Blade diameter: | 165mm (6 1/2”) |
|
|
Blade teeth: | 24 TCT |
Blade arbour: | 16mm |
Blade kerf: | 2.2mm |
|
|
Bevel capacity: | 0° to 55° |
Depth of cut at 90°: | 55mm |
Depth of cut at 45°: | 38mm |
|
|
Electrical insulation: | Double insulated |
Laser class: | Class 2 |
Weight: | 4.1kg |
|
|
This tool is double insulated. There are two independent barriers of insulation to protect you from the possibility of electric shock.
The sound intensity level for the operator may exceed 105dB(A) and sound protection measures are necessary.
3
