Manuals / Global Machinery Company / Power Tools / Saw

Global Machinery Company LS620SR Using the LightSabre system, Changing the batteries, Maintenance

Models: LS620SR

1 11
Download 11 pages 21.27 Kb
Page 10
Image 10

3.Tighten the 2 hex screws.

4.Replace the plug and run the saw under no load to check that it runs smoothly before using it to cut any materials.

Using the LightSabre system

Warnings. Do not stare directly at the laser beam.

Never aim the beam at any person or an object other than the work piece.

Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s.

Always ensure the laser beam is aimed at a sturdy work piece without reflective surfaces i.e. wood or rough coated surfaces are acceptable. Bright shiny reflective sheet steel or the like is not suitable for laser use as the reflective surface could direct the beam back at the operator.

Only turn laser beam on when tool is on work piece.

1.Mark the line of the cut on the work piece.

2.Adjust the angle of cut as required.

3.Plug in the machine and start the motor.

4.When the blade is at its maximum speed (approximately 2 seconds), place the saw on the work piece.

5.Switch on the laser beam using the switch (2).

6.Align the beam with the mark on the work piece and slowly push the saw forward using both hands, keeping the red light beam on the mark.

7. Switch off the laser beam on completion of the cut.

Changing the batteries

1.Hold the jigsaw with both hands and use your thumbs to push the base of the laser light battery cover (3) upwards. Steady it with your index fingers to prevent it getting away from you.

2.Replace both AAA batteries, taking care to insert the new batteries with the correct polarity

3.To replace the battery cover (3), locate the lugs on the cover below those on the case and slide the cover down until it snaps into position.

Caution. Remove the laser light batteries when the tool is to be stored without use for a few days or more. If left in position, the batteries might leak and damage the laser light assembly. Damage due to leaking batteries is not covered under warranty.

General inspection

Regularly check that all the fixing screws are tight. They may vibrate loose over time.

Maintenance

1.Store the tool, instruction manual and accessories in a secure place. In this way you will always have all the information and parts ready to hand.

2.Keep the tool’s air vents unclogged and clean at all times.

3.Remove dust and dirt regularly. Cleaning is best done with compressed air or a rag.

4.Never use caustic agents to clean plastic parts.

5.Lubricate the guide roller from time to time with a drop of oil. It will extend the life of the roller.

Caution. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company LS620SR Using the LightSabre system, Changing the batteries, General inspection, Maintenance
Page 9 Page 11

LS620SR specifications

The Global Machinery Company LS620SR is an innovative and versatile piece of equipment that stands out in the competitive landscape of construction machinery. Engineered to provide top-notch performance, this model has earned a reputation for reliability and efficiency across various applications.

At the heart of the LS620SR is its robust engine, which delivers exceptional power while maintaining fuel efficiency. The machine is equipped with a high-torque diesel engine that optimizes performance in demanding conditions. This engine not only meets stringent emission standards but also ensures that users can work longer hours without worrying about excessive fuel consumption.

One of the standout features of the LS620SR is its unique hydraulic system. The advanced hydraulic technology allows for smooth operation and superior lifting capabilities. Operators can easily maneuver heavy loads with precision, making it ideal for construction sites, landscaping projects, and other heavy-duty tasks. Additionally, the machine is designed with a quick-attach system, allowing for rapid tool changes, thus enhancing productivity and versatility.

The LS620SR boasts a user-friendly interface fitted with intuitive controls. The ergonomic cab design provides superior visibility, reducing operator fatigue during long hours of operation. The spacious interior is equipped with climate control features, ensuring comfort in varying weather conditions. Safety is also a priority, with advanced features like a rollover protective structure and emergency shutoff systems, ensuring confident operation even in challenging environments.

This machinery is built with durability in mind, utilizing high-quality materials that can withstand the rigors of heavy use. The chassis is reinforced to enhance stability and longevity, which is critical on uneven terrain typically encountered on job sites. Additionally, the LS620SR is designed for ease of maintenance, with easily accessible components that facilitate routine checks and repairs, minimizing downtime.

Incorporating the latest technology, the LS620SR is compatible with telematics systems that allow real-time monitoring of machine performance and condition. This feature enables operators to track metrics such as fuel consumption, usage statistics, and maintenance schedules, helping to optimize operations and reduce overall costs.

In summary, the Global Machinery Company LS620SR is a cutting-edge machine that combines power, efficiency, and user-friendly features. With its innovative design and advanced technologies, it is a reliable choice for professionals seeking to enhance productivity and performance on their job sites. Whether for excavation, landscaping, or heavy lifting, the LS620SR is a formidable ally in modern construction and industrial tasks.