Additional safety rules for jigsaws
WARNINGS. Before connecting a tool to a power source (mains switch power point receptacle, outlet, etc.) be sure that the voltage supply is the same as that specified on the nameplate of the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.
Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool.
Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the blade.
•Ensure that the lighting is adequate.
•Do not use the saw unless the guards are in place
•Keep the shoe flat on the work piece.
•Do not put pressure on the saw, such that it slows the motor down. Allow the saw blade to cut without pressure. You will get better results and you will be taking better care of your tool.
•Keep the area free of tripping hazards.
•Do not let anyone under 18 years operate this jigsaw.
•Only use blades in good condition.
•Before cutting, check that there is sufficient clearance for the blade under the work piece.
•Do not touch the blade after operation. It will be very hot.
•Keep your hands away from under the work piece.
•Never use your hands to remove sawdust, chips or waste close by the blade.
•Rags, cloths, cord, string and the like should never be left around the work area.
•Avoid cutting nails. Inspect the work piece and remove all nails and other foreign objects before beginning sawing.
•Support the work properly.
•Never reach over the blade to remove waste or off cuts.
•Do not attempt to free a jammed blade before first switching off the machine.
•If you are interrupted when operating the saw, complete the process and switch off before looking up.
•Periodically check that all nuts, bolts and other fixings are properly tightened.
•Do not store materials or equipment above a machine in such a way that they could fall into it.
•Always hold the saw on parts that are insulated. If you accidentally cut into hidden wiring or the saw’s own cable, the metal parts of the saw will become ‘live’.
•Do not secure the jigsaw upside down in a vice or work bench and use it as a saw bench. This can lead to serious injury.
•When using the jigsaw, use safety equipment including safety goggles or shield, ear defenders, dust mask and protective clothing including safety gloves.
Contents of carton
•Parallel fence
•10 Wood cutting blades
•Dust extraction adaptor
Unpacking
Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Assembly
The GMC jigsaw is packed, fully assembled except for the blade.
6
