Overload cutout

 

L

The saw should not be overloaded

through attempts to take too deep

 

a cut, too fast a cut or operated

 

for too long. The saw should not

 

be operated for more than 30

 

minutes continuously after which

 

time it should be allowed to cool

 

for a period of at least 5 minutes.

 

 

If overloaded, the thermal overload circuit will trip. The button of the reset switch (27) is partially ejected and the saw motor cuts out. Restore power as follows.

1.Wait until the motor has cooled (approx. 5 minutes).

2.Depress the reset switch (27) (Fig. L).

3.Check that the saw is again operational and restart taking care not to duplicate the circumstances that caused the original overload.

Removing swarf and chips

1.The swarf and chips are collected within the removable cover section of the handle. This provides a further safety measure as it helps suppress sparks caused by metal swarf.

2.

Periodically check the level of

M

 

chips and swarf in the chamber

 

 

as seen through the site glass

 

 

(14) (Fig. M).

 

When the chamber is about 3/4

 

full, it must be emptied as follows.

 

3.

Switch off the saw and unplug

 

 

it from the mains supply.

 

 

 

4.

Unscrew the cover release

N

 

knobs (10 and 11) and take off

 

 

cover section (13) (Fig. N).

 

Note. Setting the saw to a

30 degree bevel makes it easier to access the release knobs (10 and 11).

5.Dispose of the swarf and chips and wipe the collection chamber clean.

6.Replace the cover section (13) and the knobs (10 and 11).

Using a dust collection system

WARNING. A vacuum or other

type of dust collection systemO must not be used when cutting

metal. It can cause an explosion!

1.For cutting wood only. Remove the dust extraction plug (12) (Fig. O).

2.Use the same fixing screw to attach the wood cutting dust

extraction adaptor (28) to the

 

 

P

saw (Fig. P).

 

 

 

 

3. Connect the saw to a dust

 

 

extraction system.

 

 

4. When it is desired to change

 

 

the workpieces from wood

 

 

to metal, any dust extraction

 

 

system connected to the saw

 

 

 

 

MUST be disconnected and

 

the dust extraction plug (12)

 

Q

replaced.

 

Using the parallel fence

 

The parallel fence (9) allows

 

you to make parallel cuts in a

 

workpiece, all at the same width.

 

CAUTION. Always ensure that

 

the saw is switched off and

 

 

unplugged from the power supply

 

 

 

 

before making any adjustments.

 

R

1. Loosen the parallel fence

 

 

locking knob (8) (Fig. Q).

 

 

2. Slide the parallel fence (9)

 

 

through the parallel fence

 

 

slots (25) in the base plate

 

 

(16) (Fig. R).

 

 

11

Page 10 Page 12
Page 11
Image 11
Global Machinery Company MPS184M Overload cutout, Removing swarf and chips, Using a dust collection system
Page 10 Page 12

MPS184M specifications

Global Machinery Company has made significant strides in the world of manufacturing with its flagship product, the MPS184M. This multi-functional machine is designed to cater to a diverse range of industrial applications, showcasing exceptional versatility and efficiency that sets it apart from its competitors.

One of the main features of the MPS184M is its robust construction, which is built to withstand the rigors of heavy-duty operations. The machine is equipped with a powerful engine that delivers high performance while maintaining low fuel consumption, making it an environmentally friendly choice for industries looking to reduce their carbon footprint. The advanced engineering behind the MPS184M ensures that it operates smoothly even under extreme conditions, enhancing its reliability in tough environments.

The MPS184M is designed with cutting-edge technology that incorporates smart automation features. Operators can benefit from an intuitive control panel that allows for seamless adjustments and real-time monitoring of performance metrics. This technology maximizes operational efficiency, reducing downtime and ensuring a high return on investment for users.

Another hallmark of the MPS184M is its adaptability. The machine can be equipped with a variety of attachments and accessories, enabling it to perform multiple tasks such as lifting, digging, and transporting materials. This versatility makes it an ideal choice for construction sites, warehouses, and other industrial settings where a multi-purpose machine is required.

Safety is also a key priority in the design of the MPS184M. The machine comes with advanced safety features, including emergency stop buttons, anti-slip surfaces, and reinforced safety guards, ensuring that operators are protected while using the equipment.

In terms of maintenance, the MPS184M is designed for easy serviceability. Regular maintenance checks can be performed quickly, minimizing downtime and ensuring that the machine remains in optimal working condition throughout its lifecycle.

Ultimately, Global Machinery Company's MPS184M stands as a testament to innovation in the machinery sector, blending power, efficiency, and safety into a single platform. Whether it's for large construction projects or smaller-scale industrial tasks, the MPS184M continues to impress customers around the globe with its exceptional capabilities and reliable performance.
Top Page Image Contents