Assembly
1.Place the fixed support pole into the base.
2.Secure the fixed support pole to the base by tightening the
2 recessed hex screws in the base, use the 5mm hex key to tighten these screws.
3.Place the adjustable support pole into the fixed support pole.
4.Position the adjustable support pole so that the slot in the pole is in line with the Phillips head screw.
5.Using a Phillips head screwdriver tighten the screw so that it extends into the recess.
6.Lower the adjustable support pole and let it rest on the Phillips head screw for support.
7.Attach the tension handle to the front of the fixed support pole and tighten, this will hold the adjustable support pole in position.
8.Fit the accessory storage compartment over the adjustable support pole and lower down onto the fixed support pole.
9.With the accessory storage compartment positioned at the top of the fixed support pole tighten the 2 hex bolts
to secure the compartment in position.
10.Fit the wheel storage compartments onto the accessory storage compartment and using a Phillips head screwdriver tighten the 4 pan head tapping screws to secure the wheel storage compartments in place.
11.Fit the bench grinder support plate onto the top of the adjustable support pole.
12.Secure the bench grinder support plate in position by tightening the 2 recessed hex screws located underneath the plate.
9
