c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g.Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

c. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

d. When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

e. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety instructions for cordless screwdrivers

Loss of control can cause personal injury.

If possible, always use clamps or a vice to hold your work.

Always switch off before you put the tool down.

Ensure that the lighting is adequate.

Do not put pressure on the screwdriver, such that it slows the motor down. Allow the screwdriver to operate without pressure. You will get better results and you will be taking better care of your tool.

Keep the area free of tripping hazards.

Do not let anyone under 18 years operate this tool.

Only use accessory bits in good condition.

Before screwdriving, check that there is sufficient clearance under the workpiece.

Do not touch the bit after operation. It will be very hot.

Keep your hands away from under the workpiece.

Never use your hands to remove sawdust, chips or waste close by the bit.

5

Page 5
Image 5
Global Machinery Company PFC46V instruction manual Additional safety instructions for cordless screwdrivers, Service