Assembly
The Dust Extractor is shipped partly disassembled.
Casters
1.Place the base plate upside down and attach the four casters.
Support pole
1.Turn the base plate the right way round and attach the support pole. The
Fan housing
1.Attach the fan housing to the support pole.
Collector
1.With the gasket in place, attach the collector to the fan housing.
Collector support brackets
1.Fix a bracket to the base plate and then to the collector.
2.Repeat for the other bracket.
Bag support
1.Attach the bag support to the collector.
Bags
1.Fit both bags over the collector.
2.Use the belt on each bag to secure the bag in place.
Anti-vibration bolts
1.Loosen the lock nut on each
2.Adjust the two bolts so that the heads are flush with the bottom of the fan housing.
3.Retighten the lock nuts.
7
