Getting started
English | The Jabra BT160 is easy to operate. The answer/end button on the headset performs | |||
different functions depending on how long you press it. | ||||
| ||||
|
|
|
| |
| Instruction: | Duration of press: |
| |
| Tap | Press briefly |
| |
| Press | Approx: 1 second |
| |
| Press and hold | Approx: 5 seconds |
| |
|
|
|
| |
1Charge your headset
Make sure that your Jabra BT160 headset is fully charged before you start using it. Use the AC adaptor to charge from a power socket. Connect your headset as shown in fig. 3. When the LED is solid blue, your headset is charging. When the solid blue LED turns off, it is fully charged.
2Turn on your headset
•Press the answer/end button to turn on your headset
•Press and hold the answer/end button to turn off your headset
3Pair it with your phone
Before you use your Jabra BT160, you need to pair it with your mobile phone.
1.Put the headset in pairing2 mode Make sure that the headset is on.
Press the answer/end button and press the volume up (+) button at the same time, until a solid blue light comes on.
2.Set your Bluetooth phone to ‘discover’ the Jabra BT160
Follow your phone’s instruction guide. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a typical mobile phone in fig. 4)
3.Your phone will find the Jabra BT160
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN3 = 0000 (4 zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.
4Wear it how you like it
The Jabra BT160 is ready to wear on your right ear. If you prefer the left, gently flip and rotate the earhook 180°. (See fig. 2)
For optimal performance, wear the Jabra BT160 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone. (See fig. 5)
5How to...
Answer a call
•Tap the answer/end button on your headset to answer a call
End a call
•Tap the answer/end button to end an active call
Reject a call (Dependent on your phone supporting this feature)
•Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal
Make a call
•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset
Activate voice dialing (Dependent on your phone supporting this feature)
•Tap the answer/end button. For best results, record the
Redial last number (Dependent on your phone supporting this feature)
•Press the answer/end button
Adjust sound and volume
•Press the volume up or down (+ or
