GN Netcom OG-I Connecting toYour Telephone, Maintenance, Figure Amplified Configuration Figure

Models: OG-I OG-II

1 8
Download 8 pages 56.48 Kb
Page 5
Image 5
Connecting toYour Telephone

Connecting toYour Telephone

An amplifier is often needed to connect the headset to the telephone or telephone system. For these applications, the headset is equipped with a Quick Disconnect plug which mates to a Quick Disconnect jack on the amplifier. Follow the instructions supplied with the amplifier to connect the headset and amplifier to your telephone or telephone system (see Figure 8).

Some telephones do not require amplification. For these applications the headset is equipped with a cable with a modular plug on the end. The modular connector plugs directly into a headset port (modular jack) on the telephone or console. The modular plug cable also has a mated Quick Disconnect assembly (see Figure 9).

Disconnecting at the Quick Disconnect allows you to move around without having to remove your headset. If you are on a call, disconnecting at the Quick Disconnect effectively puts the other party on hold until you return.

Maintenance

The foam covers on the receiver and microphone can be washed in mild soap and water. Replacement covers are available from your GN Netcom distributor.

Figure 8

Amplified Configuration

Figure 9

Unamplified Configuration

3

Page 5
Image 5
GN Netcom OG-I Connecting toYour Telephone, Maintenance, Figure Amplified Configuration Figure, Unamplified Configuration